Cable Bushings

• 

  Cable Bushing (Grommet / Rubber with Membrane Model)【5 Pieces Per Package】

  MISUMI_Test

  Grommet with rubber membrane. 1 pack contains 5 pieces. The incoming line outer diameter is φ4.5 mm to φ80 mm.

  • Volume Discount

  Standard Price:	78,878 IDR-
  Days to Ship:	Same day or more

• 

  Cable Bushing (Open Model / Screw Tightening Model Edge Guard)【1-10 Pieces Per Package】

  MISUMI_Test

  Screw tightening-model wire protection bushing. (It is not a mechanism for holding the wire, but rather is a mechanism which the wire passes through.)

  • Volume Discount

  • Flame-Retardant

  Standard Price:	69,176 IDR-
  Days to Ship:	8 Day(s) or more

• 

  NG Series Grommet【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  ・Grommet (NG)

  CAD ：

  2D

  Standard Price:	30,856 IDR-
  Days to Ship:	Same day or more

• 

  Cable Bushing (Open Model / Slitting )【100 Pieces Per Package】

  MISUMI_Test

  The attachment of a bushing is possible by allowing the wires to pass through the panel hole.

  • Volume Discount

  • Flame-Retardant

  Standard Price:	141,658 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Hole plugs HPL Series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Hole Plugs (HPL)
  
  [Features]
  · Small hole plug with 4 sizes of hole diameters: φ5, φ5.5, φ7, and φ8.
  · Material properties include elasticity using TPE (an elastomer) and silicon rubber.
  · Supported installation plate thickness is 1.0 mm to 3.0 mm.

  CAD ：

  2D

  Standard Price:	30,856 IDR-
  Days to Ship:	Same day or more

• 

  Grommet with filmSG series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Grommet with film. (SG)

  CAD ：

  2D

  Standard Price:	42,658 IDR-
  Days to Ship:	Same day or more

• 

  Small hole plugs MHD series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Small Hole Plugs (MHD)
  
  [Features]
  · Small hole plug with 4 sizes of hole diameters: φ5, φ5.5, φ7, and φ8.
  · Material properties include elasticity using TPE (an elastomer) and silicon rubber.
  · Supported installation plate thickness is 1.0 mm to 3.0 mm.

  CAD ：

  2D

  Standard Price:	30,856 IDR
  Days to Ship:	7 Day(s) or more

• 

  RB type rubber bushing【2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · TMC series specific rubber bushing.
  · Use for case cable outer diameters of φ8 to φ9 mm.

  Standard Price:	23,481 IDR
  Days to Ship:	Same day

• 

  Rubber bushings for use with THB387 and THB391.【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Rubber bushings for use with THB387 and THB391 series products.
  · Use for working with thin diameter cables or removing multiple wires.
  · When used with wires of less than φ7.0 mm, 6000347LA can prevent rubber bushings from protruding
  and ensure stable waterproof properties. Use as required.

  Standard Price:	88,651 IDR-
  Days to Ship:	Same day or more

• 

  Cable Bush (Cord Stopper)_test0730

  MISUMI_Test

  Low-price cord stopper to attached the power cord to the panel and protect the cord

  • Volume Discount

  • Flame-Retardant

  Standard Price:	115,902 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cable Gland Panel Rubber Gasket for Mounting【10 Pieces Per Package】

  MISUMI_Test

  Panel mount packing of ST / BS series gland

  • Volume Discount

  Standard Price:	40,244 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cable Bushing (Open Model)【100 Pieces Per Package】

  MISUMI_Test

  Snap bushings that can be mounted with one-touch operation

  • Volume Discount

  • Flame-Retardant

  Standard Price:	125,561 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cable Bushing (Blind / Black)【100 Pieces Per Package】

  MISUMI_Test

  Black blind cap that can be mounted with one-touch operation

  • Volume Discount

  • Flame-Retardant

  Standard Price:	173,853 IDR-
  Days to Ship:	Same day or more

• 

  Bushing BN Nozzle【1-10 Pieces Per Package】

  AMERICAN DENKI

  [Features]
  ・ Nylon resin with superior heat resistance, impact resistance and abrasion resistance.
  ・ Can be used in a wide range of applications such as boards and concrete walls, peripheral equipment of machinery and office equipment.
  ・ Both the inner ends are chamfered to ensure that the thing passing through the nozzle is less likely to be scratched.

  • Volume Discount

  Standard Price:	67,576 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Cable Bush (Hidden / M Screw)【1-100 Pieces Per Package】

  MISUMI_Test

  Hidden cap to close the M screw round hole

  • Volume Discount

  • Flame-Retardant

  Standard Price:	111,072 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cable Bush (Hidden / PG Screw)【1-100 Pieces Per Package】

  MISUMI_Test

  Hidden cap to close the PG screw round hole

  • Volume Discount

  • Flame-Retardant

  Standard Price:	111,072 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Locknut for Cable Gland【10 Pieces Per Package】

  MISUMI_Test

  Lock nut for the cable gland panel mount

  • Volume Discount

  Standard Price:	82,097 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Multiple Model Cable Gland - Rubber Bush

  MISUMI_Test

  Rubber bushings for clustered-model cable glands

  • Volume Discount

  Standard Price:	72,438 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cable Bushing (Blind Gray / Ivory)【100 Pieces Per Package】

  MISUMI_Test

  Ivory color and gray color of the blind cap

  • Volume Discount

  • Flame-Retardant

  Standard Price:	172,874 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cable Bushing (Grommets / Open Model)【5 Pieces Per Package】

  MISUMI_Test

  Rubber-made open-model grommets. The incoming line outer diameter is offered in plenty of sizes from φ6 mm to φ45 mm.

  • Volume Discount

  Standard Price:	72,438 IDR-
  Days to Ship:	8 Day(s) or more

• 

  U-Shaped Bushing (Standard Model)【5 Pieces Per Package】

  MISUMI_Test

  Protective bushing that can be mounted to edges of a square hole

  • Volume Discount

  Standard Price:	152,926 IDR-
  Days to Ship:	8 Day(s) or more

• 

  U-Shaped Bushing (Flexible Model)【20-100 Pieces Per Package】

  MISUMI_Test

  Protection bushing that is suitable for mounting a modified shape opening.

  • Volume Discount

  • Flame-Retardant

  Standard Price:	59,561 IDR-
  Days to Ship:	8 Day(s) or more

• 

  U-Shaped Bushing (Flexible Model)

  MISUMI_Test

  Opening protective bushing with excellent flexibility

  • Volume Discount

  Standard Price:	224,883 IDR-
  Days to Ship:	8 Day(s) or more

• 

  U-Shaped Bushing (with Slits), Square Hole, Edge Guard Compatible

  MISUMI_Test

  Protective bushing containing slit that is suitable for the transformation of the opening.
  Extra 1 m cut selling goods, which is ideal for using small amounts.
  Generally 100 m is sold

  • Volume Discount

  Standard Price:	2,373,667 IDR-
  Days to Ship:	8 Day(s) or more

• 

  BN Cap (BN Nozzle Internal Diameter: 60 Dedicated, White)【5 Pieces Per Package】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 60), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is white.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  ・The BN cap and BN nozzle can be fitted and installed using a one touch push.
  ・The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  Standard Price:	305,853 IDR
  Days to Ship:	9 Day(s) or more

• 

  BN Cap (BN Nozzle Internal Diameter: 60 Dedicated, Black)【5 Pieces Per Package】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 60), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is black.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  The BN cap and BN nozzle can be fitted and installed using a one touch push.
  The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  Standard Price:	568,083 IDR
  Days to Ship:	11 Day(s) or more

• 

  Joint Bushing Internal Diameter 50 Joint

  AMERICAN DENKI

  Bushing series ring with internal thread for extension, for which the length can be adjusted by combination.

  Standard Price:	51,512 IDR
  Days to Ship:	9 Day(s) or more

• 

  Joint Bushing Internal Diameter 50 Bind Tool

  AMERICAN DENKI

  This is a dedicated bind tool for the bushing series whose length can be adjusted by combining bushings.

  Standard Price:	14,487 IDR
  Days to Ship:	10 Day(s) or more

• 

  Joint Bushing Internal Diameter 50 Flange

  AMERICAN DENKI

  This is a terminal with flange used for the outer wall of a bushing series that can adjust length through combination.

  Standard Price:	54,732 IDR
  Days to Ship:	11 Day(s) or more

• 

  Joint Bushing Internal Diameter 50 Ring 20 mm

  AMERICAN DENKI

  This is a bushing series extension use ring with female screw (length 18 mm) for which the length can be adjusted by combination.

  Standard Price:	54,732 IDR
  Days to Ship:	11 Day(s) or more

• 

  Joint Bushing Internal Diameter 50 Ring 30 mm

  AMERICAN DENKI

  Bushing series ring (length 29 mm) with internal thread for extension for which the length can be adjusted by combination.
  
  [Features]
  · Bushing made of Nylon resin that protects cords and tubing in through-holes.
  · A new form nozzle system makes length adjustments possible, depending on the combination.
  · Quick removal and attachment using a one-touch screw in all kinds of locations around products and equipment.
  · Length is freely adjusted.
  · This one will not break.
  · Various combinations can be constructed using a one touch screw requiring only turning, for joints stable JIS metric trapezoidal threads (Tr60x3) are used.
  The dimensions of the mounting holes is ⌀65-compatible (core drills are available), and using the cap (JB5C), opening and closing of the through holes is possible, if necessary.
  Prepare a binding tool (JB5T) that can be easily and securely constructed.
  A "free effective length" is sought by an extensive lineup and parts.
  The used Nylon resin is resin that maintains a good balance of heat resistance, oil resistance, abrasion resistance, and chemical resistance.
  Excels in the environment because it does not include flammable material (UL94V-0) or toxic substances and it is possible to obtain a safe environment because recycling is possible.
  Does not expose to the outside air cables or cords in any environment; protects from corrosion or pest damage.

  Standard Price:	61,170 IDR
  Days to Ship:	9 Day(s) or more

• 

  Joint Bushing Internal Diameter 50 Ring 50 mm

  AMERICAN DENKI

  An extension ring (length 50 mm) with internal threads for the bushing series, whose length can be adjusted by combining bushings.

  Standard Price:	74,049 IDR
  Days to Ship:	9 Day(s) or more

• 

  Rubber Bushing for 22 mm2 Wires

  AMERICAN DENKI

  A bushing that can be used in 100 A plugs and connector bodies eliminates gaps between the cord aperture and wires.

  Standard Price:	118,478 IDR-
  Days to Ship:	7 Day(s) or more

• 

  BN Cap (BN Nozzle Internal Diameter: 30 Dedicated, White)【5 Pieces Per Package】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 30), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  ・The BN cap and BN nozzle can be fitted and installed using a one touch push.
  ・The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  Standard Price:	189,950 IDR
  Days to Ship:	9 Day(s) or more

• 

  BN Cap (BN Nozzle Internal Diameter: 30 Dedicated, Black)【5 Pieces Per Package】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 30), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is black.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  The BN cap and BN nozzle can be fitted and installed using a one touch push.
  The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  Standard Price:	177,716 IDR
  Days to Ship:	11 Day(s) or more

• 

  BN Cap (BN Nozzle Internal Diameter: 40 Dedicated, White)【5 Pieces Per Package】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 40), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is white.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  ・The BN cap and BN nozzle can be fitted and installed using a one touch push.
  ・The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  Standard Price:	209,267 IDR
  Days to Ship:	7 Day(s) or more

• 

  BN Cap (BN Nozzle Internal Diameter: 40 Dedicated, Black)【5 Pieces Per Package】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 40), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is black.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  The BN cap and BN nozzle can be fitted and installed using a one touch push.
  ・The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  Standard Price:	209,267 IDR
  Days to Ship:	7 Day(s) or more

• 

  BN Cap (BN Nozzle Internal Diameter: 50 Dedicated, White)【5 Pieces Per Package】

  AMERICAN DENKI

  By using it in combination with the BN nozzle (inner diameter: 50), foreign material can be prevented from entering into a pipe or through a hole or a thing penetrating through an equipment or panel no longer requiring a through hole. The product is white in color.
  
  [Features]
  ・ The cap is made of a flame retardant nylon resin that does not contain toxic substances and has a good balance of heat resistance, impact resistance, abrasion resistance, oil resistance, chemical resistance and tracking resistance characteristics.
  ・ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ・ BN nozzle is of one-touch screw in type.
  ・ BN caps and BN nozzles are one-touch push in type fittings that can easily interlock into each other.
  ・ A vast range of small and large internal diameter BN nozzles is available, the internal diameter of the small-diameter nozzles being in the range of ⌀8–⌀120.
  ・ The products are available in two colors - black and white - such that they can be used with the items of any color.

  Standard Price:	247,902 IDR
  Days to Ship:	9 Day(s) or more

• 

  BN Cap (BN Nozzle Internal Diameter: 50 Dedicated, Black)【5 Pieces Per Package】

  AMERICAN DENKI

  By using in combination with the BN nozzle (inner diameter: 50), foreign material is prevented from penetrating inside a piece of equipment, panel or piping, without requiring a through hole. The product is black.
  
  [Features]
  · Uses a flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is a one touch screw with threads only.
  The BN cap and BN nozzle can be fitted and installed using a one touch push.
  The internal diameter of the nozzle lines up a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  Standard Price:	369,278 IDR
  Days to Ship:	7 Day(s) or more

• 

  BN Nozzle

  AMERICAN DENKI

  · Bushing made of Nylon resin that protects cords and tubing in through-holes. Made of Nylon plastic which excels in shock resistance.
  
  [Features]
  · A flame retardant Nylon resin that does not contain toxic substances and that holds superior heat, impact, abrasion, oil, chemical, and tracking resistance characteristics in good balance.
  ▪ Both ends of the inner surface of the BN nozzle are chamfered to prevent scratches from appearing on the surface of objects which are inserted into it.
  ▪ BN nozzle is screw type with threads only.
  Pushing the BN cap and the B nozzle is only a one-touch push; can easily fitted and installed.
  The internal diameter of the nozzle comes in a wide range of sizes from a small opening diameter up to a large opening diameter ⌀8–⌀120.
  Black and white are available, so it can be combined with any material.

  Standard Price:	283,316 IDR
  Days to Ship:	9 Day(s) or more

• 

  Joint Bushing Internal Diameter 50 Cap

  AMERICAN DENKI

  Flange lid for the bushing series whose length can be adjusted by combining bushings.

  Standard Price:	51,512 IDR
  Days to Ship:	11 Day(s) or more

• 

  Joint Bushing Internal Diameter 50 Set

  AMERICAN DENKI

  This is a bushing ring series set product (a set of 2 flanges and 20 rings) that can be used in various combinations to adjust length.

  Standard Price:	138,438 IDR
  Days to Ship:	9 Day(s) or more

• 

  Joint Bushing Internal Diameter 50 Ring 25 mm

  AMERICAN DENKI

  Bushing series ring (length 24mm) with internal thread for extension for which the length can be adjusted by combination.
  
  [Features]
  · Bushing made of Nylon resin that protects cords and tubing in through-holes.
  · A new form nozzle system makes length adjustments possible, depending on the combination.
  · Quick removal and attachment using a one-touch screw in all kinds of locations around products and equipment.
  · Length is freely adjusted.
  · This one will not break.
  · Various combinations can be constructed using a one touch screw requiring only turning, for joints stable JIS metric trapezoidal threads (Tr60x3) are used.
  The dimensions of the mounting holes is ⌀65-compatible (core drills are available), and using the cap (JB5C), opening and closing of the through holes is possible, if necessary.
  Prepare a binding tool (JB5T) that can be easily and securely constructed.
  A "free effective length" is sought by an extensive lineup and parts.
  The used Nylon resin is resin that maintains a good balance of heat resistance, oil resistance, abrasion resistance, and chemical resistance.
  Excels in the environment because it does not include flammable material (UL94V-0) or toxic substances and it is possible to obtain a safe environment because recycling is possible.
  Does not expose to the outside air cables or cords in any environment; protects from corrosion or pest damage.

  Standard Price:	57,950 IDR
  Days to Ship:	17 Day(s) or more

• 

  Free bushing【100 Pieces Per Package】

  KAMEDA DENKI

  Mounts to and protects end surfaces, cut surfaces, and openings of a panel.
  
  [Features]
  · Mounts to the cut surface of a panel and protects electrical wires.
  · This is cut and used based on hole periphery and so is compatible with holes of all sizes and can be used freely with even or uneven holes.
  · Can be elongated for use in the case of a larger hole.
  · Excellent electrical and wear resistance.

  Standard Price:	221,341 IDR-
  Days to Ship:	7 Day(s) or more

• 

  φ25 plug for reserve hole

  KASUGA ELECTRIC

  [Features]
  · A rubber cover for enhancing the appearance vacant panel holes.
  · Light beige color (Munsell 5Y7/1 EQUIV). For ⌀ 25-mm diameter holes.

  Standard Price:	22,161 IDR
  Days to Ship:	7 Day(s) or more

Loading...