(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Compornents
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Compornents
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Screw-Hole-Related Tools（Coating Y/N：NA Page4）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Days to Ship |
|
|---|
-
Standard Price: 112,168 IDR- Days to Ship: 9 Day(s) or more -
Hand Tap Series For High Hardness Steel Zero Tap EX-SH-HT
OSG
Suitable for heat treated chromium steel, nickel chrome steel, manganese steel, tool steel, etc., with high hardness.
Standard Price: 142,100 IDR- Days to Ship: 9 Day(s) or more -
Hand Tap Series For Deep Hole (Slim Shank) EX-SST
OSG
The neck part is thinner than the base diameter, so that it is suitable for processing longer and deeper than the thread part of the tap.
Standard Price: 259,373 IDR- Days to Ship: 9 Day(s) or more -
Hand Tap Series For Difficult-To-Cut Materials Long Shank CPM-LT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Standard Price: 256,245 IDR- Days to Ship: 8 Day(s) or more -
Hand Tap Series With Oil Filler Cap OIL-HT
OSG
Convenient for lateral tapping and processing deep holes. The cutting oil acts on the cutting edge through the oil hole, enabling high-speed and high-precision tapping
Standard Price: 199,955 IDR- Days to Ship: 9 Day(s) or more -
Point Tap Series For Ni Base Ultra Heat Resistant Alloy NI-POT
OSG
Exerts power in Ni-base heat-resistant alloy (Inconel® 718, etc.) of 40 to 45 HRC aged after undergoing a solution heat treatment, used in such fields as aircraft, aerospace, and chemical industries
Standard Price: 215,591 IDR- Days to Ship: 9 Day(s) or more -
Point Tap Series For Stainless Steel Long Shank EX-LT-SUS-POT
OSG
With excellent sharpness and durability, it is used for stainless steel through holes where poor machinability is a problem.
- Volume Discount
Standard Price: 261,229 IDR- Days to Ship: 8 Day(s) or more -
Point Tap Series Long Shank For General Use EX-LT-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Standard Price: 215,591 IDR- Days to Ship: 8 Day(s) or more -
Point Tap Series For Difficult-To-Cut Materials CPM-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Standard Price: 155,000 IDR- Days to Ship: 2 Day(s) or more -
Point Tap Series For Difficult-To-Cut Materials Long Shank CPM-LT-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Standard Price: 289,082 IDR- Days to Ship: 8 Day(s) or more -
Point Tap Series For Thin Plate EX-SS-POT
OSG
Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum
Standard Price: 115,519 IDR- Days to Ship: 2 Day(s) or more -
Point Tap Series With Oil Hole OIL-POT
OSG
Effective for sideways machining of through holes and deep holes. The cutting oil acts on the cutting edge through the oil hole, enabling high-speed and high-precision tapping
Standard Price: 224,973 IDR- Days to Ship: 9 Day(s) or more -
Taper Tap Series for Pipes Interlap Type Long Shank EX-LT-IRT
OSG
It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.
Standard Price: 903,589 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes Interlap Type Short Thread EX-S-IRT
OSG
It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.
- Volume Discount
Standard Price: 457,013 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes Interlap Type Short Thread, Long Shank EX-LT-S-IRT
OSG
It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.
Standard Price: 963,898 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes Short Screw for Stainless Steel, Long Shank LT-SUS-S-TPT
OSG
It is suitable for hard-to-cut materials, such as stainless steel.
Standard Price: 728,462 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes Spiral Tap SFT-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Standard Price: 374,070 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes Spiral Tap, Long Shank LT-SFT-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Standard Price: 629,954 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes Spiral Tap, Long Shank Short Screw LT-SFT-S-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Standard Price: 845,735 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes Spiral Tap Short Screw SFT-S-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
- Volume Discount
Standard Price: 505,636 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes General Use (Left-hand thread) TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
Standard Price: 525,365 IDR- Days to Ship: 11 Day(s) or more -
Taper Tap Series for Pipes General Use Long Shank LT-TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
Standard Price: 549,196 IDR- Days to Ship: 9 Day(s) or more -
Taper Tap Series for Pipes General Use Short Screw, Long Shank LT-S-TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
Standard Price: 648,717 IDR- Days to Ship: 9 Day(s) or more -
Taper Tap Series for Pipes General Use Short Screw, Oxidizing H-S-TPT
OSG
Used to process tapered female pipe threads. Short threading type used for tapping short thread lengths such as those for elbows and tees
Standard Price: 371,954 IDR- Days to Ship: 9 Day(s) or more -
Taper Tap Series for Pipes Taper Tap for Carbide Pipes OT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Standard Price: 3,113,402 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Standard Price: 2,618,000 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes For Soft Steel STL-TPT
OSG
Suitable for low carbon steel, general mild steel and more
Standard Price: 317,227 IDR- Days to Ship: 9 Day(s) or more -
Taper Tap Series for Pipes Short Screws for Soft Steel STL-S-TPT
OSG
Suitable for low carbon steel, general mild steel and more
Standard Price: 343,809 IDR- Days to Ship: 11 Day(s) or more -
Taper Tap Series for Pipes For Difficult-to-Machine Materials CPM-TPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
- Volume Discount
Standard Price: 579,277 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Standard Price: 814,336 IDR- Days to Ship: 8 Day(s) or more -
Taper Tap Series for Pipes Short Screws for Difficult-to-Machine Materials, Long Shank CPM-LT-S-TPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Standard Price: 936,425 IDR- Days to Ship: 11 Day(s) or more -
Taper Tap Series for Pipes With Oil Hole OIL-TPT
OSG
Convenient for lateral tapping of pipe threads and processing deep holes. The cutting oil acts on the cutting edge through the oil hole, enabling high-speed and high-precision tapping
Standard Price: 1,047,443 IDR- Days to Ship: 9 Day(s) or more -
Parallel Tap Series for Pipes For Oversize EX-SPT
OSG
Used to process female threads for parallel pipe threads.
Standard Price: 256,245 IDR- Days to Ship: 11 Day(s) or more -
Parallel Taper Tap Series for Pipes For stainless steel EX-SUS-SPT
OSG
It is suitable for hard-to-cut materials, such as stainless steel.
Standard Price: 270,870 IDR- Days to Ship: 9 Day(s) or more -
Parallel Taper Tap Series for Pipes Spiral Tap SFT-SPT
OSG
Spiral types have been made available for blind holes to match the form of the workpiece.
Standard Price: 299,015 IDR- Days to Ship: 9 Day(s) or more -
Parallel Tap Series for Pipes Spiral Tap, Long Shank LT-SFT-SPT
OSG
To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.
Standard Price: 600,245 IDR- Days to Ship: 9 Day(s) or more -
Parallel Tap Series for Pipes New Roll Tap NRT-SPT
OSG
Convenient for lateral tapping of pipe threads and processing deep holes.
Standard Price: 415,736 IDR- Days to Ship: 8 Day(s) or more -
Parallel Tap Series for Pipes Point tap EX-POT-SPT
OSG
[Specifications]
· Shape: Point tap
· Screw type: pipe parallel
· Chamfer threads: 4 P
· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy ) [◎] / Alloy Steel (SCM) [◎] / Cast Steel (SC) [◎] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, Etc.) [○]Standard Price: 265,627 IDR- Days to Ship: 9 Day(s) or more -
Parallel Tap Series for Pipes General Use (Left-hand thread) SPT
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.
Standard Price: 364,136 IDR- Days to Ship: 9 Day(s) or more -
Taper Tap Series for Pipes General Use Long Shank LT-SPT
OSG
Used to process female threads for parallel pipe threads.
Standard Price: 543,954 IDR- Days to Ship: 11 Day(s) or more -
Parallel Tap Series for Pipes General Use Oxidizing H-SPT
OSG
Used to process female threads for parallel pipe threads.
Standard Price: 256,245 IDR- Days to Ship: 8 Day(s) or more -
Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT
OSG
To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.
Standard Price: 2,376,531 IDR- Days to Ship: 8 Day(s) or more -
Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes, Long Shank OT-LT-SPT
OSG
To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.
Standard Price: 3,193,199 IDR- Days to Ship: 8 Day(s) or more -
Parallel Tap Series for Pipes For Difficult-to-Machine Materials CPM-SPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, or tempered material with hardness of about 20 to 45 HRC
Standard Price: 393,658 IDR- Days to Ship: 11 Day(s) or more -
Parallel Tap Series for Pipes With Oil Hole OIL-SPT
OSG
Convenient for lateral tapping of pipe threads and processing deep holes. The cutting oil acts on the cutting edge through the oil hole, enabling high-speed and high-precision tapping
Standard Price: 1,206,934 IDR- Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Hand Tap Series For Difficult-To-Cut Materials Long Shank CPM-LT | Point Tap Series For Ni Base Ultra Heat Resistant Alloy NI-POT | Point Tap Series For Stainless Steel Long Shank EX-LT-SUS-POT | Point Tap Series For Difficult-To-Cut Materials Long Shank CPM-LT-POT | Taper Tap Series for Pipes Interlap Type Long Shank EX-LT-IRT | Taper Tap Series for Pipes Interlap Type Short Thread EX-S-IRT | Taper Tap Series for Pipes Interlap Type Short Thread, Long Shank EX-LT-S-IRT | Taper Tap Series for Pipes Short Screw for Stainless Steel, Long Shank LT-SUS-S-TPT | Taper Tap Series for Pipes Spiral Tap, Long Shank LT-SFT-TPT | Taper Tap Series for Pipes Spiral Tap, Long Shank Short Screw LT-SFT-S-TPT | Taper Tap Series for Pipes General Use (Left-hand thread) TPT | Taper Tap Series for Pipes General Use Short Screw, Long Shank LT-S-TPT | Taper Tap Series for Pipes General Use Short Screw, Oxidizing H-S-TPT | Taper Tap Series for Pipes Taper Tap for Carbide Pipes OT-TPT | Taper Tap Series for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT | Taper Tap Series for Pipes Short Screws for Soft Steel STL-S-TPT | Taper Tap Series for Pipes For Difficult-to-Machine Materials CPM-TPT | Taper Tap Series for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT | Taper Tap Series for Pipes Short Screws for Difficult-to-Machine Materials, Long Shank CPM-LT-S-TPT | Parallel Taper Tap Series for Pipes For stainless steel EX-SUS-SPT | Parallel Tap Series for Pipes Spiral Tap, Long Shank LT-SFT-SPT | Parallel Tap Series for Pipes General Use (Left-hand thread) SPT | Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT | Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes, Long Shank OT-LT-SPT | Parallel Tap Series for Pipes For Difficult-to-Machine Materials CPM-SPT | ||||||||||||||||||||
| Days to Ship | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 2 Day(s) or more | 8 Day(s) or more | 2 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter / unified | Meter | Meter / Whitworth | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes |
| Screw size (Nominal) | M3 ～ M30 | M6 ～ M20 | M3 ～ M6 | M3 ～ M24 | M6 ～ M30 | 1/2UNJ ～ M12 | M3 ～ M24 | W1 ～ M36 | M1.4 ～ M48 | M3 ～ M24 | M1.4 ～ M20 | M6 ～ M30 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | PF1 ～ PF3/8 | PS1 ～ PS3/8 | R1 ～ R3/8 | PF1 ～ PF3/8 | PF1 ～ PF3/8 | G1 ～ G3/8 | G1 ～ Rp3/8 | Rp1 ～ Rp3/8 | G1 ～ G7/8 | G1 ～ G3/8 | G1 ～ G3/8 | G1 ～ G3/8 | G1 ～ G3/8 |
| Pitch (P), Number of Threading(mm) | 0.5 ～ 3.5 | 1 ～ 2.5 | 0.5 ～ 1 | 0.5 ～ 3 | 1 ～ 3.5 | 0.5 ～ 40 | 0.5 ～ 3 | 0.4 ～ 20 | 0.3 ～ 5 | 0.5 ～ 3 | 0.3 ～ 2.5 | 1 ～ 3.5 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 19 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 2.5P ～ 5P | 1.5P ～ 5P | 2P ～ 5P | 1.5P ～ 5P | 5P | 4P | 5P | 5P | 5P | 5P | 4P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 4P | 4P | 2.5P | 2.5P | 2.5P | 4P | 4P | 4P | 1.5P ～ 4P | 3P | 3P | 4P | 4P |
| Tool Material Type | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | Carbide | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | High-speed steel | High-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Powder high-speed steel | High-speed steel |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Zinc Alloy Casting (ZDC)[○] | Nickel-based alloy (Inconel, etc.)[◎] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Copper (Cu)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Zinc Alloy Casting (ZDC)[○] |
| Tap Type | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Point tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Coating Type | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 46 ～ 135 | 62 ～ 105 | 120 ～ 150 | 100 ～ 200 | 80 ～ 250 | 46 ～ 85 | 100 ～ 200 | 80 ～ 300 | 34 ～ 185 | 100 ～ 200 | 34 ～ 105 | 80 ～ 250 | 120 ～ 150 | 55 ～ 120 | 120 ～ 150 | 100 ～ 150 | 55 ～ 110 | 100 ～ 150 | 100 ～ 150 | 55 ～ 95 | 55 ～ 95 | 100 ～ 150 | 100 ～ 150 | 55 ～ 110 | 55 ～ 95 | 55 ～ 95 | 55 ～ 95 | 55 ～ 95 | 55 ～ 95 | 62 ～ 95 | 120 ～ 150 | 120 ～ 150 | 55 ～ 95 | 55 ～ 95 | 55 ～ 110 | 120 ～ 150 | 55 ～ 95 | 55 ～ 95 | 55 ～ 95 | 120 ～ 150 | 55 ～ 95 | 55 ～ 95 | 100 ～ 150 | 55 ～ 95 | 150 |
Loading...
Configure
Specification/Dimensions
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTC-51
- CTG-42
- CTC-39
- CTG-36
- CTC-31
- CTG-28
- CTC-25
- CTG-22
- CTC-19
- CTG-16
- CTC-15
- No.0
- No0UN
- NO.0-80UNF
- No.0-80UNF
- NO.10
- No.10
- No.1
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- NO.6-32UNC
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- 0.9
- S0.9
- 1
- 1
- 1"
- 1UN
- 1UNS
- BC1
- G1
- M1
- M1.0
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PS1
- PT1
- R1
- Rc1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1´-20UNEF
- 1'-14UNF
- 1'-14UNS
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1'-11.5
- 1´-11.5
- 1'-11
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- 1 1/2
- 1"1/2U
- 1"1/2UN
- 1"1/2
- BSF1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11.5
- 1´1/2-11.5
- 1'1/2-11
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4U
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1´1/4-11.5
- 1'1/4-11
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8U
- 1"1/8UN
- G1"1/8
- NPS1"1/8
- NPT1"1/8
- PS1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-14UNEF
- 1'1/8-12UNF
- 1'1/8-11
- 1′1/8-11
- 1 1/8-8UN
- 1'1/8-7UNC
- 1´ 1/8-7UNC
- 1'1/8W7
- 1"1/16U
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2UNJ
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF1/2
- PS1/2
- R1/2
- Rc1/2
- Rp1/2
- SM1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4U
- 1"3/4UN
- BSF1"3/4
- G1"3/4
- NPS1"3/4
- NPT1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8U
- 1"3/8UN
- 1"3/8
- BSF1"3/8
- G1"3/8
- PS1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1"3/16U
- 1"3/16UN
- 1/4
- 1/4UN
- 1/4UNJ
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PS1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- PS1/4-19
- 1/4-18
- 1/4W20
- 1/4SM24
- 1/4SM40
- 1 5/8
- 1"5/8U
- 1"5/8UN
- BSF1"5/8
- W1"5/8
- 1 5/8-8UN
- 1"5/16U
- 1"5/16UN
- M1～6
- 1"7/8UN
- BSF1"7/8
- W1"7/8
- 1 7/8-8UN
- 1 7/16
- 1'8UNC
- 1'W8
- 1/8
- 1/8PT
- 1/8UN
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PS1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1/8SM40
- 1/8W40
- 1/8SM44
- 1 9/16
- M1～10
- 1'11.5
- 1´11.5
- 1'12UNF
- 1'14UNS
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- W1/16
- 1/16-28
- 1/16-27
- 1/16SM80
- 1'20UNEF
- M1.1
- M1.1-1.2
- M1.2
- S1.2
- 1.29
- 1.37
- BC1.37
- M1.4
- S1.4
- M1.4-1.6
- 1.45
- M1.5
- M1.6
- M1.7
- M1.8
- M1.8-2.0
- 2
- 2"
- 2U
- 2UN
- BSF2
- For M2
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- W2
- W/2
- 2'-11.5
- 2´-11.5
- 2'-11
- 2´-11
- 2′-11
- 2-8UN
- 2"1/2UN
- G2"1/2
- NPS2"1/2
- NPT2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/2
- 2'1/2-11
- 2´1/2-11
- 2′1/2-11
- 2´1/2-8
- 2"1/4UN
- BSF2"1/4
- NPS2"1/4
- NPT2"1/4
- R2"1/4
- W2"1/4
- 2′1/4-11
- W2"1/8
- 2"3/4UN
- R2"3/4
- W2"3/4
- W2"3/8
- 2'4.5UNC
- 2'W4.5
- M2～4.5
- W2"7/8
- M2～8
- M2～10
- 2'12UN
- M2.2
- M2.2-2.5
- M2.3
- For M2.5
- M2.5
- For M2.6
- M2.6
- 3M
- 3UN
- For M3
- G3
- M3
- M3.0
- NPS3
- NPT3
- No3UN
- R3
- Rp3
- W3
- 3´-11
- 3′-11
- 3´-8
- 3"1/2UN
- G3"1/2
- NPS3"1/2
- NPT3"1/2
- R3"1/2
- Rp3"1/2
- 3´1/2-11
- 3′1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF3/4
- PS3/4
- R3/4
- Rc3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- M3～5
- M3～6
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNJ
- 3/8W
- BC3/8
- G3/8
- M3 to 8
- M3~8
- M3～8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PS3/8
- PT3/8
- R3/8
- Rc3/8
- Rp3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- PT3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3～12
- 3/16
- 3/16UN
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- 3/32
- SM3/32
- W3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- 4UN
- For M4
- G4
- M4
- M4.0
- NPS4
- NPT4
- No4UN
- R4
- Rp4
- №4-40UNC
- 4´-11
- 4′-11
- 4M0.75
- W4"1/2
- M4～6
- M4～10
- M4～13
- M4～14
- M4.5
- 5
- 5M
- CTV5
- M5
- M5.0
- No5UN
- TV5
- №5-40UNC
- 5/1
- 5 to 8 mm
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- NPT5/8
- PS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5～10
- M5 - M12
- M5～12
- M5～13
- 5/16
- 5/16UN
- 5/16UNJ
- 5/16W
- BC5/16
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-32UNEF
- 5/16-24 UNF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32UN
- W5/32
- 5/32W32
- 5/64SM64
- 5.5M
- M5.5
- 6
- 6UN
- For M6
- M6
- M6.0
- No6UN
- No6UNJ
- W6
- No6-40UNF
- №6-32UNC
- M6～20
- M6.5
- W6.8
- M7
- PG7
- W7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- NPT7/8
- PS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- W"7/8
- 7/8-20UNEF
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- 7/32UN
- SM7/32
- W7/32
- 7/32W24
- 7/32SM32
- 7.5
- M7.5
- 8
- 8UN
- CTV8
- For M8
- M8
- M8.0
- No8UN
- No8UNJ
- TV8
- W8
- №8-32UNC
- 8 to 12 mm
- M8 to 12
- M8~12
- M8.5
- 9
- M9
- PG9
- 9/16
- 9/16UN
- BC9/16
- UNF9/16
- W9/16
- 9/16-24UNEF
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- 9/64
- SM9/64
- 9/64SM40
- M9.5
- W9.5
- W9.8
- 10
- 10UN
- M10
- M10.0
- No10UN
- No10UNJ
- TM10
- TR10
- TV10
- TW10
- W10
- №10-32UNF
- №10-24UNC
- M10～13
- M10～25
- M10～30
- 11
- M11
- PG11
- W11
- 11/16
- W11/16
- SM11/32
- 11/64
- SM11/64
- 11/64SM40
- 12
- M12
- M12.0
- M]12
- No12UN
- TM12
- TW12
- W12
- W12.5
- 13
- M13
- W13
- W13/16
- PG13.5
- W13.5
- W13.8
- M14
- M14.0
- TM14
- TW14
- W14
- 15
- M15
- W15
- W15/16
- 15/64
- SM15/64
- 15/64SM28
- 16
- M16
- M16.0
- PG16
- TM16
- TR16
- TW16
- W16
- 17
- M17
- W17
- M18
- M18.0
- TM18
- TW18
- W18
- 19
- M19
- W19
- M19～32
- M19～33
- M19～38
- M19～42
- 20
- M20
- M20.0
- TM20
- TR20
- TW20
- W20
- W20.32
- M21
- PG21
- W21
- 22
- M22
- M22.0
- M22X
- TM22
- TW22
- W22
- M23
- W23
- M24
- M24.0
- M24X
- TM24
- TW24
- W24
- 25
- M25
- M25X
- TM25
- TW25
- W25
- M25～50
- M25～60
- M25～70
- M25～72
- M26
- TM26
- TW26
- W26
- M27
- W27
- 28
- M28
- TM28
- TW28
- W28
- M29
- PG29
- W29
- M30
- TM30
- TW30
- W30
- 31
- 31/32
- M32
- TM32
- W32
- M33
- W33
- M34
- W34
- M35
- W35
- 36
- M36
- PG36
- TM36
- W36
- M37
- M38
- W38
- 39
- M39
- W39
- M40
- TM40
- W40
- 42
- M42
- PG42
- W42
- M42～120
- M43
- M44
- W44
- M45
- W45
- M46
- M48
- W48
- M50
- W50
- M52
- W52
- M54
- W54
- M55
- W55
- M56
- W56
- M58
- M60
- W60
- M62
- W62
- M64
- M65
- W65
- M68
- M70
- W70
- M72
- M75
- W75
- M76
- M78
- M80
- M82
- M85
- M90
- M95
- M100
- M110
- M115
- M120
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.34
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.5-2
- 1.75
- 2
- 2.5
- 3
- 3 1/2
- 3.5
- 4
- 4 1/2
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 60
- 64
- 72
- 80
- 150
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- OSG (157)
- YAMAWA MFG (151)
- ISHIHASHI (21)
- TRUSCO (16)
- NACHI(FUJIKOSHI) (13)
- DC SWISS (4)
- HOZAN (4)
- GUHRING (3)
- H & H (3)
- ONISHI MANUFACTURING (3)
- PROCHI (2)
- SANDVIK (2)
- SKC (2)
- RUKO (1)
- KANETEC (0)
- MIERASEN (0)
- NEW STRONG (0)
- GREENCROSS (0)
- EARTH MAN (0)
- KO-KEN TOOL (0)
- NIIGATA SEIKI (SK) (0)
- TSUBOSAN (0)
- SMATO (0)
- NOGA JAPAN (0)
- NAKANISHI (0)
- ENGINEER (0)
- UNION TOOL (0)
- SK 11 (0)
- EIKOSHA (0)
- RENNSTEIG (0)
- LIGHTSEIKI (0)
- KUKKO (0)
- NS TOOL (0)
- TANOI MFG (0)
- Brand ESCO (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy