(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Compornents
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Compornents
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
DAIWARASHI Adjuster
| Days to Ship |
|
|---|
-
Adjuster for Heavy Weights, D-C/D-C, S
DAIWARASHI
A standard type adjuster for heavy loads
[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.- Volume Discount
- CAD ：
- 2D
Standard Price: 81,975 IDR- Days to Ship: Same day or more -
Adjuster for Heavy Weights (Thrust Bearings Mounted), D-H
DAIWARASHI
An adjuster for heavy weights with a built-in thrust bearing
[Features]
· Suitable for the adjustment of heavy machinery.
· Stability is outstanding since a large diameter bolt is used.
· Smooth adjustments can be made even for non-heavy machinery.- CAD ：
- 2D
Standard Price: 545,546 IDR- Days to Ship: 7 Day(s) or more -
Adjuster, for Anchor Fastening, D-EII/D-EII-ST
DAIWARASHI
A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
[Features]
· Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
· Can easily be fixed using an anchor bolt.
· Please use an anchor bolt.
· Please use a 12 mm anchor bolt.
· Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
· Note: The screw rotates and tilts somewhat.- Volume Discount
- CAD ：
- 2D
Standard Price: 92,523 IDR- Days to Ship: 7 Day(s) or more -
Adjuster, for Heavy Loads, with Rubber, D-C-R
DAIWARASHI
A rubber equipped type adjuster for medium loads
[Features]
· Receiver features a chloroprene rubber coating.- Volume Discount
- CAD ：
- 2D
Standard Price: 112,248 IDR- Days to Ship: 7 Day(s) or more -
Adjuster with Screw Shake Stop for Anchor Fastening, D-J-EII
DAIWARASHI
An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- CAD ：
- 2D
Standard Price: 107,532 IDR- Days to Ship: 7 Day(s) or more -
DAIWARASHI
An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
[Features]
· Since the rubber part comes in contact with the floor, floor damage is prevented.
· A light vibration-proof type adjustment bolt.
· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
· A nylon washer is used between the receiver and bolt, and rotation is smooth.
· The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
· The SI type is white and is characterized by hardly leaving traces of rubber.
· Suitable for office equipment, etc.- CAD ：
- 2D
Standard Price: 76,906 IDR- Days to Ship: 7 Day(s) or more -
Adjuster for Heavy Weights (Wide Base Plate Type), D-CⅢ/D-CⅢ and S/D-CⅢ-W
DAIWARASHI
A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
[Features]
· The receiver of the stainless steel D-C III is a forged item.
· D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- Volume Discount
- CAD ：
- 2D
Standard Price: 170,786 IDR- Days to Ship: 7 Day(s) or more -
Adjuster with Rubber for Heavy Weights (Bearings Mounted), D-H-R
DAIWARASHI
An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.
[Features]
· Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
· Groove processing is applied to the rear surface of the rubber to make it non-slippery.
· Effectively protects floors.- CAD ：
- 2D
Standard Price: 642,132 IDR- Days to Ship: 11 Day(s) or more -
Adjuster for Heavy Weights (Long Screw Type), D-C-L/D-C-L, S
DAIWARASHI
A long screw adjuster with a wide adjustment range
[Features]
· Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
A limited quantity of 500 mm total length products are available for M16 and M20.
· D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- CAD ：
- 2D
Standard Price: 186,062 IDR- Days to Ship: 7 Day(s) or more -
Adjuster with Standard Base Plate, Small Diameter Type, D-F/D-F-C
DAIWARASHI
An adjuster whose screw and base have small diameters
[Features]
· Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
· Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
· A light load type with a receiver diameter that is also small.
· Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.- CAD ：
- 2D
Standard Price: 35,813 IDR- Days to Ship: 7 Day(s) or more -
Adjuster, Standard Tray, Small Space Type, D-B50/D-A60/D-A65
DAIWARASHI
A standard type adjuster in which the adjuster base is compact
[Features]
· An adjuster whose pedestal part is a compact type.
· The screw rotates and tilts somewhat.
· Since the receiver diameter is designed to be smaller than D-A/D-B, it is useful for saving space.- CAD ：
- 2D
Standard Price: 44,044 IDR- Days to Ship: 9 Day(s) or more -
Adjuster for Complete Securing of Anchor (2 Mounting Holes for Securing Anchor) D-E IV
DAIWARASHI
An adjuster for complete fixing against large vibrations in which the adjuster base is fixed with anchor bolts at two positions. Note: Please be advised that the model number in VONA has been changed from "D-E IV" to "D-E4."
- CAD ：
- 2D
Standard Price: 96,068 IDR- Days to Ship: 8 Day(s) or more -
Adjuster, For Anchor Retention, Includes Receptacle Enhanced Rib, D-EV
DAIWARASHI
[Features]
· It has been pointed out that the receiver of D-E II is easily bent since its thickness is zero. In response to this, the product has been modified to have about twice the strength of the conventional product, not by changing the plate thickness, but by increasing its hardness.
· A steel plate reinforced type adjuster for which the base for anchor fixing includes ribs.
· Please be advised that the model number in VONA has been changed from "D-E V" to "D-E5."- CAD ：
- 2D
Standard Price: 102,702 IDR- Days to Ship: 7 Day(s) or more -
Adjuster for Anchor Fixing (Equipped with Thrust Bearings) WD-EII
DAIWARASHI
An adjuster for anchor fixing that features a thrust bearing capable of smooth leveling even when a load is applied. Note: Please be advised that the model number in VONA has been changed from "WD-E II" to "WD-E2."
- CAD ：
- 2D
Standard Price: 125,238 IDR- Days to Ship: 9 Day(s) or more -
Adjuster, for Fixed Anchor (Large Base Type), D-E-W
DAIWARASHI
A medium load type adjuster for anchor fixing in which the base is wide and stable
[Features]
· By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.
· Note: The screw shaft tilts somewhat- CAD ：
- 2D
Standard Price: 184,589 IDR- Days to Ship: 7 Day(s) or more -
Adjuster with Plastic for Anchoring, D-E III
DAIWARASHI
An adjuster for anchor fixing with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-E III" to "D-E3."
[Features]
· Can easily be fixed using an anchor bolt.
· Does not stain or damage floors since a special plastic is molded into the receiver.
· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and high temperature resistance.- CAD ：
- 2D
Standard Price: 105,211 IDR- Days to Ship: 9 Day(s) or more -
DAIWARASHI
A space saving type adjuster that can be neatly stored in corners. Note: Please be advised that the model number in VONA has been changed from "D-D II" to "D-D2."
[Features]
· A special adjustment bolt for corners.
· Please use together with D-D I.
· Please use accessories such as hex nuts, etc.
· The portion that makes contact with the wall is folded.
· As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
· According to our in-house experiments, the strength has been enhanced by approximately four times.
· In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal receiver.- CAD ：
- 2D
Standard Price: 49,589 IDR- Days to Ship: 9 Day(s) or more -
Adjuster with Screw Shake Stop for Heavy Weights, D-J-C
DAIWARASHI
An adjuster for heavy weights in which the horizontal shaking of the screw shaft part is completely locked.
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- CAD ：
- 2D
Standard Price: 94,835 IDR- Days to Ship: 7 Day(s) or more -
Adjuster with Screw Shake Stop, Standard Base Plate Type, D-J-A
DAIWARASHI
A standard receiver type adjuster in which the horizontal shaking of the screw shaft part is completely locked.
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- CAD ：
- 2D
Standard Price: 60,111 IDR- Days to Ship: 7 Day(s) or more -
Adjuster for Inclined Surface, D-UII
DAIWARASHI
An adjuster for slopes in which the screw shaft part tilts. Note: please be advised that the model number in VONA has been changed from "D-U II" to "D-U2."
[Features]
· The tilting motion is extremely smooth and it is more affordable compared than the D-U-A type.- CAD ：
- 2D
Standard Price: 104,312 IDR- Days to Ship: 9 Day(s) or more -
Adjuster for Inclined Surface, D-U-A
DAIWARASHI
A standard type adjuster for slopes in which the screw shaft part tilts even more.
[Features]
The receiver part has a larger hole· than the D-A type in order to enable it to receive the spherical structure of the upper part.
· The spherical structure is divided into a sphere and a receiver.
· The receiver has undergone spherical processing to enable the sphere to moves smoothly.
· When M12/M16/M20 bolts are used, in the case of M16/M20, it is limited to about 15° since the hexagonal part comes in contact with the spherical portion.- CAD ：
- 2D
Standard Price: 136,507 IDR- Days to Ship: 7 Day(s) or more -
Adjuster for Inclined Surface Use for Anchor Fastening, D-U-EII
DAIWARASHI
An anchor fixing type adjuster for slopes in which the screw shaft part tilts even more. Note: Please be advised that the model number in VONA has been changed from "D-U-E II" to "D-U-E2."
[Features]
· The receiver part has a larger hole than the D-A type in order to enable it to receive the spherical structure of the upper part.
· The spherical structure is divided into a sphere and a receiver.
· The receiver has undergone spherical processing to enable the sphere to moves smoothly.
· M12/M16/M20 bolts can be used.
· The angle 35° is when using an M12 bolt, and when using M16/M20, since the hexagonal part contacts the spherical portion, it is limited to about 15°- CAD ：
- 2D
Standard Price: 182,867 IDR- Days to Ship: 9 Day(s) or more -
DAIWARASHI
An adjuster for light vibration-proofing with a thrust bearing that enables smooth leveling. Note: Please be advised that the model number in VONA has been changed from "WD-A III" to "WD-A3."
[Features]
· Since the rubber part comes in contact with the floor, floor damage is prevented.
· A light vibration-proof type adjustment bolt.
· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bolt bottom.
· A nylon washer is used between the receiver and bolt. and rotation is smooth.
· Suitable for office equipment, etc.- CAD ：
- 2D
Standard Price: 128,458 IDR- Days to Ship: 9 Day(s) or more -
Adjuster, Base Plate Rubber Type, D-G/D-GII
DAIWARASHI
An adjuster with a rubber-made base that is also optimal for slip prevention. Note: Please be advised that the model number in VONA has been changed from "D-G II" to "D-G2."
[Features]
· A rubber cover is used for the entire receiver, and an iron core is included inside.- CAD ：
- 2D
Standard Price: 207,175 IDR- Days to Ship: 9 Day(s) or more -
Adjuster for Heavy Weights (Thrust Bearings Mounted), WD-C/WD-C, S
DAIWARASHI
An adjuster for heavy weights with a thrust bearing that enables smooth leveling
[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.- CAD ：
- 2D
Standard Price: 106,223 IDR- Days to Ship: 9 Day(s) or more -
Adjuster for Weight (Tray Wide Type) (Equipped with Thrust Bearings) WD-CIII/WD-CIII/S
DAIWARASHI
A wide-base type adjuster for heavy weights with a thrust bearing that is capable of smooth leveling. Note: Please be advised that the model number in VONA has been changed from "WD-C III" to "WD-C3."
- CAD ：
- 2D
Standard Price: 200,892 IDR- Days to Ship: 9 Day(s) or more -
Adjuster, with Rubber for Heavy Loads, (Equipped with Thrust Bearing), WD-C-R
DAIWARASHI
A rubber type adjuster for medium loads with a thrust bearing that enables smooth leveling
[Features]
· Receiver features a chloroprene rubber coating.- CAD ：
- 2D
Standard Price: 145,515 IDR- Days to Ship: 7 Day(s) or more -
Adjuster with Rubber for Heavy Weights (Long Type), D-C-L-R
DAIWARASHI
A long screw adjuster with rubber having a wide adjustment range
[Features]
· Please refer to the caulking method of the D-C III receiver.
· Receiver features a chloroprene rubber coating.
· Groove processing has been applied to the rear surface of the rubber to make it non-slippery.- CAD ：
- 2D
Standard Price: 321,550 IDR- Days to Ship: 9 Day(s) or more -
Adjuster with Rubber for Heavy Weights (Wide Base Plate Type), D-CIII-R
DAIWARASHI
A wide base type adjuster for medium loads with rubber. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
[Features]
· The receiver features a chloroprene rubber coating and the rear side of the rubber has undergone groove processing to make it resistant to slipping.
· Has a larger outer diameter than D-C-R and feels more stable and heavy.- CAD ：
- 2D
Standard Price: 240,819 IDR- Days to Ship: 9 Day(s) or more -
Adjuster with Standard Base Plate, Plastic included, D-AII/D-BII
DAIWARASHI
A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
[Features]
· Does not stain or damage floors since a special plastic is molded into the receiver.
· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
· Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.- CAD ：
- 2D
Standard Price: 71,179 IDR- Days to Ship: 7 Day(s) or more -
Adjuster, Standard Base Plate (Thrust Bearing Mounted), WD-A/WD-B
DAIWARASHI
A standard adjuster with a thrust bearing that enables smooth leveling
[Features]
· The screw shaft rotates and tilts somewhat.
· A standard type that can be used as the adjustment bolt for any machinery.
· The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
· WD-A supports screw diameters M16 and M20, and WD-B supports screw diameter M12.- CAD ：
- 2D
Standard Price: 78,555 IDR- Days to Ship: 9 Day(s) or more -
Adjuster, Standard Base Plate Type, D-A/D-B
DAIWARASHI
The most general standard type adjuster
[Features]
· The screw shaft rotates and tilts somewhat.
· A standard type that can be used as the adjustment bolt for any machinery.
· The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
· D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.- CAD ：
- 2D
Standard Price: 48,629 IDR- Days to Ship: 7 Day(s) or more -
Adjuster with Standard Pan Plastic (with Thrust Bearings) WD-AⅡ/WD-BⅡ
DAIWARASHI
An adjuster with plastic and with a thrust bearing that is capable of smooth leveling. Note: Please be advised that the model number in VONA has been changed from "WD-A II" to "WD-A2."
- CAD ：
- 2D
Standard Price: 110,750 IDR- Days to Ship: 9 Day(s) or more -
DAIWARASHI
A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
[Features]
· A special adjuster for walls.
· Please use together with D-D II.
· Please use accessories such as hex nuts, etc.
· The portion that makes contact with the wall is folded.
· As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
· In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
· Please refer to the drawings for use.- CAD ：
- 2D
Standard Price: 51,041 IDR- Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Adjusting Bolt Shape Type |
| Swivel Angle θ(deg) |
| Mounting Shape Type |
| Height Adjusting Handle |
| Thread Material |
| Thread Surface Treatment |
| Body Material |
| Main Body Surface Treatment |
| Bottom Rubber Material |
| Thread Length L1(mm) |
| Main Body Height E(mm) |
| Nominal of Thread M(mm) |
| Properties |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI |
| Product Series | Adjuster with Screw Shake Stop for Anchor Fastening, D-J-EII | Adjuster for Heavy Weights (Wide Base Plate Type), D-CⅢ/D-CⅢ and S/D-CⅢ-W | Adjuster with Rubber for Heavy Weights (Bearings Mounted), D-H-R | Adjuster for Heavy Weights (Long Screw Type), D-C-L/D-C-L, S | Adjuster with Standard Base Plate, Small Diameter Type, D-F/D-F-C | Adjuster, Standard Tray, Small Space Type, D-B50/D-A60/D-A65 | Adjuster for Complete Securing of Anchor (2 Mounting Holes for Securing Anchor) D-E IV | Adjuster, For Anchor Retention, Includes Receptacle Enhanced Rib, D-EV | Adjuster for Anchor Fixing (Equipped with Thrust Bearings) WD-EII | Adjuster with Screw Shake Stop, Standard Base Plate Type, D-J-A | Adjuster for Inclined Surface Use for Anchor Fastening, D-U-EII | Adjuster for Heavy Weights (Thrust Bearings Mounted), WD-C/WD-C, S | Adjuster for Weight (Tray Wide Type) (Equipped with Thrust Bearings) WD-CIII/WD-CIII/S | Adjuster, with Rubber for Heavy Loads, (Equipped with Thrust Bearing), WD-C-R | Adjuster with Rubber for Heavy Weights (Wide Base Plate Type), D-CIII-R | Adjuster with Standard Base Plate, Plastic included, D-AII/D-BII | Adjuster, Standard Base Plate (Thrust Bearing Mounted), WD-A/WD-B | Adjuster with Standard Pan Plastic (with Thrust Bearings) WD-AⅡ/WD-BⅡ | ||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | Same day or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more |
| Type | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt |
| Adjusting Bolt Shape Type | Standard | Built-in Bearing Type | Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot Type | Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot Type | Standard | Built-in Bearing Type | Standard | Standard | Standard | Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot & Anchor Bolt Fixing Type | Built-in Bearing Type | Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot & Anchor Bolt Fixing Type | Anchor Bolt Mounting Type | Standard | Standard | Standard | Standard | Rubber Foot & Anchor Bolt Fixing Type | Built-in Bearing Type | Rubber Foot Type | Built-in Bearing Type | Built-in Bearing Type | Built-in Bearing Type | Standard | Rubber Foot Type | Standard | Built-in Bearing Type | Standard | Standard | Anchor Bolt Mounting Type |
| Swivel Angle θ(deg) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 ～ 35 | 15 ～ 35 | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Shape Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height Adjusting Handle | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Material | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel |
| Thread Surface Treatment | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Electrostatic Paint / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Bright Chromate Plating | Bright Chromate Plating / Others | Bright Chromate Plating / Others | Trivalent Chromate / Others | Trivalent Chromate | Bright Chromate Plating / Others | Bright Chromate Plating / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate | Bright Chromate Plating / Others | Bright Chromate Plating / Others | Electrostatic Paint / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others |
| Body Material | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Cast Iron | Stainless Steel / Steel | Stainless Steel / Cast Iron | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Synthetic Rubber (EPDM Synthetic Rubber) | Stainless Steel / Steel | Stainless Steel / Cast Iron | Stainless Steel / Steel | Stainless Steel / Cast Iron | Stainless Steel / Cast Iron | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel |
| Main Body Surface Treatment | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Paint / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Bright Chromate Plating | Bright Chromate Plating / Others | Bright Chromate Plating / Others | Trivalent Chromate / Others | Trivalent Chromate | Bright Chromate Plating / Others | Bright Chromate Plating / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate | Bright Chromate Plating / Others | Bright Chromate Plating / Others | Paint / Others | Not Provided | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others | Trivalent Chromate / Others |
| Bottom Rubber Material | - | - | - | Chloroprene Rubber | - | Chloroprene Rubber / Ethylene Propylene Rubber / Silicon | - | Chloroprene Rubber | - | ABS Resin | - | - | - | - | - | ABS Resin | - | - | - | - | - | - | Chloroprene Rubber | - | - | - | Chloroprene Rubber | Chloroprene Rubber | Chloroprene Rubber | ABS Resin | - | - | ABS Resin | - |
| Thread Length L1(mm) | 50 ～ 200 | 100 ～ 300 | 50 ～ 200 | 50 ～ 200 | 50 ～ 200 | 50 ～ 200 | 100 ～ 200 | 100 ～ 300 | 200 ～ 400 | 50 ～ 100 | 50 ～ 200 | 50 ～ 200 | 50 ～ 200 | 50 ～ 200 | 65 ～ 200 | 50 ～ 200 | 50 ～ 200 | 50 ～ 200 | 50 ～ 200 | 50 ～ 200 | 50 ～ 180 | 50 ～ 180 | 70 ～ 130 | 65 ～ 200 | 50 ～ 200 | 100 ～ 200 | 50 ～ 200 | 250 ～ 400 | 65 ～ 200 | 50 ～ 200 | 50 ～ 200 | 50 ～ 200 | 50 ～ 200 | 50 ～ 200 |
| Main Body Height E(mm) | 17 | 29.5 ～ 36.5 | 17 ～ 19 | 22 | 17 | 13 ～ 17 | 22 ～ 23 | 35 ～ 42 | 17 ～ 22 | 12.5 ～ 13.5 | 14 ～ 18 | 18 | 17 | 17 | 19 | 20 | 14 ～ 18 | 17 | 15 ～ 18 | 25 | 18 | 17 | 15 ～ 17 | 25 ～ 30 | 17 | 22 | 22 | 27 | 27 | 18 ～ 22 | 15 ～ 18 | 15 ～ 18 | 18 ～ 22 | 14 ～ 18 |
| Nominal of Thread M(mm) | 12 ～ 20 | 20 ～ 36 | 12 ～ 20 | 12 ～ 20 | 12 ～ 16 | 8 ～ 20 | 16 ～ 30 | 20 ～ 36 | 12 ～ 24 | 8 ～ 10 | 12 ～ 16 | 12 ～ 20 | 12 ～ 20 | 12 ～ 20 | 16 ～ 20 | 12 ～ 20 | 12 ～ 20 | 12 ～ 16 | 12 ～ 16 | 12 ～ 16 | 12 ～ 20 | 12 ～ 20 | 12 ～ 20 | 16 ～ 20 | 12 ～ 20 | 16 ～ 20 | 12 ～ 20 | 16 ～ 24 | 16 ～ 30 | 12 ～ 20 | 12 ～ 20 | 12 ～ 20 | 12 ～ 20 | 12 ～ 20 |
| Properties | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Corrosion Resistance / Vibration Control | Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard | Corrosion Resistance | Standard / Corrosion Resistance | Corrosion Resistance / Vibration Control | Standard | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance / Vibration Control | Standard | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Corrosion Resistance / Vibration Control | Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance |
| Swivel Mechanism | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Configure
Specification/Dimensions
-
Type
- Adjusting Bolt
- Mounting
- Precision Instrument
- Others
- Adjusting Screw with Rubber Grommet
-
Adjusting Bolt Shape Type
-
Swivel Angle θ(deg)
-
Mounting Shape Type
-
Height Adjusting Handle
-
Thread Material
-
Thread Surface Treatment
-
Body Material
-
Main Body Surface Treatment
-
Bottom Rubber Material
-
Thread Length L1(mm)
- 11.5
- 11.6
- 14
- 16
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 28
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 39.5
- 40
- 41
- 42
- 43
- 45
- 49.5
- 50
- 51
- 51.5
- 52
- 53
- 54
- 55
- 56
- 58
- 59.5
- 60
- 61
- 62
- 63
- 65
- 66
- 67.5
- 68
- 69.5
- 70
- 71
- 71.5
- 72
- 73
- 75
- 78
- 80
- 82
- 84
- 85
- 86
- 90
- 91
- 93
- 95
- 98
- 99.5
- 100
- 101.5
- 104
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 189
- 190
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 250
- 280
- 300
- 350
- 400
-
Main Body Height E(mm)
- 4
- 5
- 5.4
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.2
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 34.5
- 35
- 35~45
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 43
- 44
- 44.5
- 45
- 45~60
- 46
- 46.5
- 47
- 48
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 59.5~61.5
- 60
- 60.5
- 61
- 62
- 62.5
- 63
- 64
- 64.5
- 65
- 65.5
- 66
- 67
- 67.5
- 69
- 70
- 70.5
- 71
- 72
- 73
- 75
- 76
- 77
- 77.5
- 78.5
- 79
- 80
- 81
- 82.5
- 83
- 84.5
- 85
- 85.5
- 90
- 91
- 92
- 93
- 94
- 95
- 97
- 100
- 101
- 101.5
- 105
- 110
- 112
- 112.5
- 114.5
- 115
- 116
- 117.5
- 119
- 120
- 121
- 123
- 125
- 127
- 128
- 130
- 131
- 140
- 142
- 143
- 144
- 145
- 150
- 153
- 154
- 157
- 158
- 160
- 161
- 165
- 170
- 173
- 175
- 177
- 178
- 180
- 181
- 185
- 200
- 207
- 208
- 210
- 211
- 225
- 227
- 228
- 230
- 231
- 245
- 250
- 330
- 400
- 500
- 600
-
Nominal of Thread M(mm)
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistance
- Electrical Conductivity
-
Swivel Mechanism
Narrow search by specifying Manufacturer
-
- MISUMI_Test (17)
- DAIWARASHI (34)
- NABEYA (27)
- TAKIGEN (23)
- IMAO CORPORATION (19)
- TRUSCO (6)
- NBK (5)
- RICHENGINEERING (5)
- GIFU SANKEN KOGYO (2)
- IWATA MFG (1)
- OHNISHI MFG (1)
- YAHATA (1)
- NANSIN (0)
- KURASHIKI KAKO (0)
- ORII AND MEC (0)
- SUN FASTENER (0)
- OHNORUBBER (0)
CAD
-
- 2D
- 3D
Related Categories to Adjuster
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy