(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

OSG Chamfering / Centering Tools

Search by specifying the lower class category

25 items

: 30; 45; 60

Days to Ship	All Same day 2 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less

Leading Drill TIN-NC-LDS m_series_language_292977

OSG

TiN coating enables higher speed and longer service life compared to NC-LDS

Standard Price:	252,109 IDR-
Days to Ship:	8 Day(s) or more

Leading Drill VP-LDS m_series_language_292978

OSG

V coating enables longer service life compared to TIN-NC-LDS

Standard Price:	332,590 IDR-
Days to Ship:	8 Day(s) or more

Leading Drill, Carbide FX Coating FX-LDS m_series_language_292981

OSG

It can be used not only for chamfering, but also centering with high speed and long service life

Standard Price:	4,023,259 IDR-
Days to Ship:	10 Day(s) or more

FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series m_series_language_296390

OSG

[Features]
· FX coating with excellent oxidation resistance

Standard Price:	2,641,678 IDR-
Days to Ship:	11 Day(s) or more

FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series m_series_language_500474

OSG

[Features]
· FX coating with excellent oxidation resistance

Standard Price:	2,641,678 IDR-
Days to Ship:	8 Day(s) or more

Leading Drill Standard NC-LDS m_series_language_292979

OSG

Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).

Volume Discount

Standard Price:	138,973 IDR-
Days to Ship:	8 Day(s) or more

Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS m_series_language_292980

OSG

Ideal for chamfering deep parts with a tip angle of 90°

Standard Price:	2,716,509 IDR-
Days to Ship:	8 Day(s) or more

2-flute, Corner Rounding Type FX-ECR m_series_language_292983

OSG

Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.

Volume Discount

Standard Price:	956,306 IDR-
Days to Ship:	8 Day(s) or more

2-flute Spiral Chamfering Cutter FX-SCC m_series_language_292984

OSG

Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

Volume Discount

Standard Price:	1,625,530 IDR-
Days to Ship:	8 Day(s) or more

2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC m_series_language_292985

OSG

Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

Standard Price:	1,264,565 IDR-
Days to Ship:	8 Day(s) or more

2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC m_series_language_292986

OSG

Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.

Volume Discount

Standard Price:	1,476,772 IDR-
Days to Ship:	8 Day(s) or more

2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC m_series_language_292987

OSG

Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.

Volume Discount

Standard Price:	1,543,785 IDR-
Days to Ship:	8 Day(s) or more

3-flute Chamfering Cutter (negative type) HSCT-N m_series_language_292989

OSG

It is a negative type.

Volume Discount

Standard Price:	1,139,251 IDR-
Days to Ship:	8 Day(s) or more

3-flute Chamfering Cutter (positive type) HSCT-P m_series_language_292990

OSG

Positive type.

Volume Discount

Standard Price:	1,290,669 IDR-
Days to Ship:	8 Day(s) or more

3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N m_series_language_292991

OSG

It is a negative type.

Volume Discount

Standard Price:	1,220,336 IDR-
Days to Ship:	8 Day(s) or more

3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P m_series_language_292992

OSG

Positive type.

Volume Discount

Standard Price:	1,220,336 IDR-
Days to Ship:	8 Day(s) or more

VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter m_series_language_296363

OSG

Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.

Volume Discount

Standard Price:	696,585 IDR-
Days to Ship:	8 Day(s) or more

V-XPM-ECR HSS Chamfer Series V Coat XPM 3 Blade Corner Rounding m_series_language_296364

OSG

Powdered HSS XPM corner rounding cutter with V-coating.

Standard Price:	981,771 IDR-
Days to Ship:	8 Day(s) or more

V-UCS Hole Chamfering, Countersink, V Coating m_series_language_296391

OSG

Composite multilayer coating (V coating) is used.

Volume Discount

Standard Price:	399,653 IDR-
Days to Ship:	8 Day(s) or more

VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank m_series_language_296392

OSG

Ideal for chamfering deep parts with a tip angle of 90°

Standard Price:	365,923 IDR-
Days to Ship:	8 Day(s) or more

Electrodeposition Diamond Router ED-EM m_series_language_382493

OSG

Standard in-stock item, sold by designated agencies

[Features]
· Suitable for machining with lower cutting depth and brittle composites.
· Supports machinable ceramics processing as well.

Volume Discount

Standard Price:	597,885 IDR-
Days to Ship:	8 Day(s) or more

WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N m_series_language_1022107

OSG

[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.

Standard Price:	1,623,466 IDR-
Days to Ship:	9 Day(s) or more

WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P m_series_language_1024301

OSG

Standard Price:	1,623,466 IDR-
Days to Ship:	9 Day(s) or more

WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P m_series_language_1024302

OSG

Standard Price:	1,708,974 IDR-
Days to Ship:	11 Day(s) or more

WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N m_series_language_1024303

OSG

Standard Price:	1,708,974 IDR-
Days to Ship:	9 Day(s) or more


Brand
Product Series
Days to Ship
Application
Tip angle (θ)
Tool Diameter (D)(mm)
work material
Single blade, two blades
Peripheral Blade Y/N
Tool Material Type
Coating Y/N
Coating Type
R Size (R)(mm)


Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Leading Drill TIN-NC-LDS m_series_language_292977	Leading Drill VP-LDS m_series_language_292978	Leading Drill, Carbide FX Coating FX-LDS m_series_language_292981	FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series m_series_language_296390	FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series m_series_language_500474	Leading Drill Standard NC-LDS m_series_language_292979	Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS m_series_language_292980	2-flute, Corner Rounding Type FX-ECR m_series_language_292983	2-flute Spiral Chamfering Cutter FX-SCC m_series_language_292984	2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC m_series_language_292985	2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC m_series_language_292986	2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC m_series_language_292987	3-flute Chamfering Cutter (negative type) HSCT-N m_series_language_292989	3-flute Chamfering Cutter (positive type) HSCT-P m_series_language_292990	3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N m_series_language_292991	3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P m_series_language_292992	VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter m_series_language_296363	V-XPM-ECR HSS Chamfer Series V Coat XPM 3 Blade Corner Rounding m_series_language_296364	V-UCS Hole Chamfering, Countersink, V Coating m_series_language_296391	VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank m_series_language_296392	Electrodeposition Diamond Router ED-EM m_series_language_382493	WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N m_series_language_1022107	WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P m_series_language_1024301	WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P m_series_language_1024302	WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N m_series_language_1024303
Days to Ship	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	11 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	11 Day(s) or more	9 Day(s) or more
Application	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Hole Chamfer	Centering (Positioning) / Hole Chamfer	-	Chamfering/Horizontal	-	-	-
Tip angle (θ)	60 ～ 120	90	90	60	90	90 ～ 130	90	-	90	90	90	90	90	90	90	90	-	-	60 ～ 120	90	-	90°	-	-	-
Tool Diameter (D)(mm)	3 ～ 25	3 ～ 25	16 ～ 25	1 ～ 3.8	1 ～ 3.8	3 ～ 25	10 ～ 25	0.5 ～ 1.5	0.8 ～ 1	0.8 ～ 1	0.8 ～ 1	0.8 ～ 1	1 ～ 2	1 ～ 2	1 ～ 2	1 ～ 2	-	3 ～ 10	4.3 ～ 37	3 ～ 25	4 ～ 12	-	-	-	-
work material	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	-	-	-
Peripheral Blade Y/N	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	Available	-	NA	-	-	-
Tool Material Type	High-speed steel	Powder high-speed steel	Carbide	Carbide	Carbide	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Powder high-speed steel	High-speed steel	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide
Coating Y/N	Available	Available	Available	Available	Available	NA	Available	Available	Available	NA	Available	NA	NA	NA	NA	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	TiN	TiCN	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	Other	TiCN	-	-	Other	Other	Other
R Size (R)(mm)	-	-	-	-	-	-	-	0.1 ～ 2	-	-	-	-	-	-	-	-	-	0.5 ～ 4	-	-	-	-	-	-	-

Configure

Specification/Dimensions

Application
- Centering (Positioning)
- Hole Chamfer
- Chamfering/Horizontal
- V Groove
- Round Chamfer
- Engraved
- Drilling
- Other
Images

Clear

Tip angle (θ)
0–90

5～85

5～85°

15

20

25

30

35

40

45

45°

50

55

60

60°

60 × 120

60×120

65

70

75

80

90

90°

Center Hole Angle: 90°

Cutter Tip Angle: 100°

118

120

120°

125°

130

135

145+90
Drawing

Clear

Tool Diameter (D)(mm)
0 to 2

0.03

0.04

0.05

0.06

0.07

0.08

0.09

0.1

0.11

0.12

0.13

0.14

0.15

0.16

0.17

0.18

0.19

0.2

0.21

0.22

0.23

0.24

0.25

0.26

0.27

0.28

0.29

0.3

0.3, 0.6

0.35

0.4

0.45

0.5

0.5, 1

0.55

0.6

0.63

0.65

0.7

0.75

0.8

0.85

0.9

0.95

1

1, 2

1～2.12

1 to 2.5

1–6

1/32

1.1

1.2

1.25

1.25～2.65

1.3

1.4

1.5

1.5 to 4

1.6

1.6～3.35

1.7

1.8

1.9

2.

2

2～4.25

2~5

2–10

2～13

2.1

2.2

2.3

2.4

2.5

2.5～5.3

2.5 to 6.5

2.6

2.7

2.8

2.9

2.95

3

3–6

3–8

3~14

3 to 15

3～22

3.1

3.15

3.15～6.7

3.2

3.3

3.4

3.5

3.6

3.7

3.8

3.9

4

4～8.5

4–10

4.2

4.3

4.4

4.5

4.6

4.8

5

5～10.6

5–12

5/16

5.1

5.2

5.3

5.4

5.5

5.6

5.8

6

6~15

6.2

6.3

6.3,8.3,10.4,12.4,16.5,20.5

6.30/8.30/10.40/12.40/16.50/20.50

6.3/8.3/10.4/12.4/16.5/20.5

6.3～13.2

6.35

6.4

6.5

6.6

6.8

7

7.2

7.3

7.4

7.5

7.6

7.7

7.8

8

8 to 17

8.2

8.3

8.4

8.5

8.8

9

9.1

9.4

9.5

9.52

10

10.0(+0.3)

10～21.2

10.1

10.2

10.3

10.4

10.5

10.8

11

11.1

11.2

11.4

11.5

11.88

12

12.1

12.3

12.4

12.5

12.7

13

13.4

13.5

14

14.2

14.4

14.5

14.6

14.8

15

15.0(+0.3)

15.1

15.2

15.4

15.5

15.6

15.87

16

16.15

16.3

16.5

16.5,20.5,25.0,37.0

17

17.1

17.7

18

18.2

18.5

18.6

19

19.05

19.5

20

20.0(+0.3)

20.5

21

21.77

22

22.3

22.4

22.5

23

23.4

23.5

24

24.5

25

25.0(+0.3)

Max: 25, Min: 4.2

25.20

25.3

25.4

26

26.5

26.6

27

27.5

28

28.5

29

29.9

30

30.0(+0.3)

Max: 30, Min: 4

30.20

30.5

31

Max: 31, Min: 10

31.5

31.7

31.9

32

32.6

32.7

33

33.1

33.3

34

34.1

34.8

34.9

35

35.4

35.5

35.9

36

36.9

37

37.1

37.9

38

39

39.83

40

41

Max: 41, Min: 20

42

43

45

45.6

46

47

48

49

49.85～134.6

50

50.7

51

52

52.8

53

53.6

53.91

54

54.3

55

56

56.8

57.0

57.9

58

58.2

60

61.4

62

62.2

63

64

64.6

65

66

67.4

67.94

69.2

69.8

70

71.8

72

73.3

74

75

75.5

76

80

90

95

100
Drawing

Clear

work material
Details

Clear

Single blade, two blades
- Single blade
- Double-edged
Images

Clear

Peripheral Blade Y/N
- Available
- NA
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
Details

Clear

Coating Y/N
- Available
- NA
Clear

Coating Type
- TS
- TiAlN
- TiCN
- TiN
- DLC
- Non-Coated
- AlCrN
- ALT
- Other
Details

Clear

R Size (R)(mm)
0.1

0.15

0.2

0.25

0.3

0.35

0.4

0.45

0.5

R0.5

0.5/1/1.5/2

0.5 to 4

0.5~5

0.55

0.6

0.65

0.7

0.75

R0.75

0.8

0.85

0.9

0.95

1

1RM

1RY

R1

1, 1.5

1/2/3/4

1–3

1–5

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

1.8

1.85

1.9

1.95

2

2RM

2RY

R2

2, 3

2.05

2.1

2.15

2.2

2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.6

2.7

2.75

2.8

2.9

3

3RM

3RY

R3

3.25

3.5

R3.5

3.75

4

4RM

4RY

R4

4.25

4.5

R4.5

4.75

5

5RM

R5

5–10

5.25

5.5

5.75

6

R6

6.25

6.5

6.75

7

R7

7.25

7.5

7.75

8

R8

8.25

8.5

8.75

9

R9

9.5

10

R10

10.5

11

11~15

11.5

12

R12

12.5

R12.5

13

13.5

14

14.5

15

R15

15.5

16

R16

16–20

16.5

17

17.5

18

18.5

19

19.5

20

20.5

21

21.5

22

22.5

23

23.5

24

24.5

25

25.5

26

26.5

27

27.5

28

28.5

29

29.5

30

XRM

XRY
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI_Test (37)
- Economy series (5)
- Brand ESCO (114)
- FUJIGEN (77)
- YAMAWA MFG (56)
- IWATA TOOL (53)
- GUHRING (34)
- NOGA JAPAN (29)
- OSG (25)
- OKABE (23)
- THE CUT (22)
- EIKOSHA (21)
- ILIX (17)
- BIG DAISHOWA SEIKI (15)
- WATERMILLS (15)
- ATOM (10)
- STAR-M (9)
- Nine9 (8)
- SANKO MFG (8)
- KYOWA SEIKO (7)
- OKAZAKI SEIKO (7)
- TRUSCO (7)
- TAIYO-TOOL (6)
- FUKUDA (5)
- NS TOOL (5)
- TOYO DRILL (4)
- DIJET (4)
- DIXI (4)
- RUKO (4)
- ALPEN (3)
- ASAHI TOOLS (3)
- PLUS_TOOL (3)
- MAPAL (3)
- Poulten&Graf (3)
- ATI (2)
- DAIICHITOOL (2)
- KOPAL (2)
- SKC (2)
- 7 LEADERS (1)
- H & H (1)
- RYOCO SEIKI (1)
- SANDVIK (1)
- UNION TOOL (1)
- WALTER TITEX (1)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Chamfering / Centering Tools

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

OSG Chamfering / Centering Tools

Search by specifying the lower class category

Configure

Specification/Dimensions

Application

Tip angle (θ)

Tool Diameter (D)(mm)

work material

Single blade, two blades

Peripheral Blade Y/N

Tool Material Type

Coating Y/N

Coating Type

R Size (R)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Chamfering / Centering Tools

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

OSG Chamfering / Centering Tools

Search by specifying the lower class category

Configure

Specification/Dimensions

Application

Tip angle (θ)

Tool Diameter (D)(mm)

work material

Single blade, two blades

Peripheral Blade Y/N

Tool Material Type

Coating Y/N

Coating Type

R Size (R)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Chamfering / Centering Tools

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB