(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Compornents
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Compornents
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
YAMAWA MFG Screw-Hole-Related Tools（Screw size (Nominal)：1/4-28UNF）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
| Days to Ship |
|
|---|
-
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
· High blade tip strength makes it suitable for work materials that are easily worn.
· More suitable for manual work compared to taps of other shapes.
· 2 types are available, with 5P or 1.5P biting threads.
· When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
· Machining with mechanical machinery is also possible.
· Has straight grooves out of consideration for scrap stow.
[Applications]
· Optimal for threading SPC/SPH and other thin steel plates or SS400/S20 or below mild steel.Standard Price: 125,460 IDR Days to Ship: 9 Day(s) or more -
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.Standard Price: 141,766 IDR Days to Ship: 7 Day(s) or more -
Stainless Steel Hand Tap SU-HT
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 5 m/min or less is recommended.
[Applications]
Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.Standard Price: 198,206 IDR Days to Ship: 13 Day(s) or more -
YAMAWA MFG
The spiral tap is ideal for machining blind holes as scrap is discharged from the grooves twisted in the same direction as the threads.
[Features]
· The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
· Intermittent cutting of female threads with key groove is also possible.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining blind holes.
* N-SP models will transition to SP as soon as stock runs out.Standard Price: 145,340 IDR Days to Ship: 9 Day(s) or more -
Spiral Tap for Stainless Steel SU+SP/SU-SP
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.- Volume Discount
Standard Price: 230,640 IDR Days to Ship: 11 Day(s) or more -
Carbide Hand Tap for Cast Iron N-CT FC
YAMAWA MFG
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.
- Volume Discount
Standard Price: 1,875,692 IDR Days to Ship: 11 Day(s) or more -
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Standard Price: 442,199 IDR- Days to Ship: 11 Day(s) or more -
Stainless Steel Point Tap SU+PO/SU-PO
YAMAWA MFG
Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.- Volume Discount
Standard Price: 236,754 IDR Days to Ship: 8 Day(s) or more -
Spiral Tap for left screws SP (LH)(N-SP(LH))
YAMAWA MFG
* N-SP(LH) will switch to SP(LH) as soon as the stock runs out.
Standard Price: 260,616 IDR Days to Ship: 11 Day(s) or more -
Dry Processing Roll Tap OL+RZ/OL-RZ
YAMAWA MFG
It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.
- Volume Discount
Standard Price: 509,279 IDR Days to Ship: Quote -
High Performance Roll Tap HP+ RZ/HP-RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
- Volume Discount
Standard Price: 509,279 IDR Days to Ship: Quote -
Point tap for left thread PO (LH) (N-PO(LH))
YAMAWA MFG
Point tap suitable for machining through holes.
[Features]
· The grooves on the cutting edge side of the biting part are cut obliquely to push the chips forward.
· Causes less trouble due to chips.
· The cutting torque is low.
[Applications]
· Can process both synchronously and asynchronously.
· Suitable for drilling through holes.Standard Price: 253,982 IDR Days to Ship: 13 Day(s) or more -
Long Shank Spiral Tap LS-SP(LS-N-SP)
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
Standard Price: 310,251 IDR- Days to Ship: 11 Day(s) or more -
Long Shank Point Tap LS-PO(LS-N-PO)
YAMAWA MFG
* LS-N-PO will switch to LS-PO as soon as the stock runs out.
Standard Price: 301,651 IDR- Days to Ship: 11 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
| ||||||
| Brand | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | ||||||||||||||
| Days to Ship | 9 Day(s) or more | 7 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | Quote | Quote | 13 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more |
| Screw Types | unified | unified | unified | unified | unified | unified | unified | unified | unified | unified | unified | unified | unified | unified |
| Screw size (Nominal) | 1/4-28UNF | 1/4-28UNF | 1/4-28UNF | 1/4-28UNF | 1/4-28UNF | 1/4-28UNF | 1/4-28UNF | 1/4-28UNF | 1/4-28UNF | 1/4 ～ 1/4-28UNF | 1/4-28UNF | 1/4-28UNF | 1/4-28UNF | 1/4-28UNF |
| Pitch (P), Number of Threading(mm) | - | - | - | - | - | - | - | - | - | 28 | - | - | - | - |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 5P | 1.5P ～ 4P | 2.5P | 2.5P | 1.5P ～ 3P | 1.5P ～ 5P | 5P | 2.5P | 4P | 2P ～ 4P | 5P | 2.5P | 5P |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | - | - | Powder high-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - |
| Tap Type | Hand Tap | Point tap | Hand Tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Point tap | Spiral Tap | Roll tap | Roll tap | Point tap | Spiral Tap | Point tap |
| Hole type | For through hole / For blind hole | For through hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | - | For through hole | For through hole / For blind hole | For through hole | For blind hole | For through hole |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | NA | NA | NA |
| Coating Type | - | - | - | - | - | - | - | - | - | TiCN | TiCN | - | - | - |
| Overall Length (L)(mm) | 62 | 62 | 62 | 62 | 62 | 62 | 150 ～ 200 | 62 | 62 | 62 | 62 | 62 | 100 ～ 150 | 100 ～ 150 |
Loading...
Configure
Specification/Dimensions
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTC-51
- CTG-42
- CTC-39
- CTG-36
- CTC-31
- CTG-28
- CTC-25
- CTG-22
- CTC-19
- CTG-16
- CTC-15
- No.0
- No0UN
- NO.0-80UNF
- No.0-80UNF
- NO.10
- No.10
- No.1
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- NO.6-32UNC
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- 0.9
- S0.9
- 1
- 1
- 1"
- 1UN
- 1UNS
- BC1
- G1
- M1
- M1.0
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PS1
- PT1
- R1
- Rc1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1´-20UNEF
- 1'-14UNF
- 1'-14UNS
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1'-11.5
- 1´-11.5
- 1'-11
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- 1 1/2
- 1"1/2U
- 1"1/2UN
- 1"1/2
- BSF1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11.5
- 1´1/2-11.5
- 1'1/2-11
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4U
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1´1/4-11.5
- 1'1/4-11
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8U
- 1"1/8UN
- G1"1/8
- NPS1"1/8
- NPT1"1/8
- PS1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-14UNEF
- 1'1/8-12UNF
- 1'1/8-11
- 1′1/8-11
- 1 1/8-8UN
- 1'1/8-7UNC
- 1´ 1/8-7UNC
- 1'1/8W7
- 1"1/16U
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2UNJ
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF1/2
- PS1/2
- R1/2
- Rc1/2
- Rp1/2
- SM1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4U
- 1"3/4UN
- BSF1"3/4
- G1"3/4
- NPS1"3/4
- NPT1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8U
- 1"3/8UN
- 1"3/8
- BSF1"3/8
- G1"3/8
- PS1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1"3/16U
- 1"3/16UN
- 1/4
- 1/4UN
- 1/4UNJ
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PS1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- PS1/4-19
- 1/4-18
- 1/4W20
- 1/4SM24
- 1/4SM40
- 1 5/8
- 1"5/8U
- 1"5/8UN
- BSF1"5/8
- W1"5/8
- 1 5/8-8UN
- 1"5/16U
- 1"5/16UN
- M1～6
- 1"7/8UN
- BSF1"7/8
- W1"7/8
- 1 7/8-8UN
- 1 7/16
- 1'8UNC
- 1'W8
- 1/8
- 1/8PT
- 1/8UN
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PS1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1/8SM40
- 1/8W40
- 1/8SM44
- 1 9/16
- M1～10
- 1'11.5
- 1´11.5
- 1'12UNF
- 1'14UNS
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- W1/16
- 1/16-28
- 1/16-27
- 1/16SM80
- 1'20UNEF
- M1.1
- M1.1-1.2
- M1.2
- S1.2
- 1.29
- 1.37
- BC1.37
- M1.4
- S1.4
- M1.4-1.6
- 1.45
- M1.5
- M1.6
- M1.7
- M1.8
- M1.8-2.0
- 2
- 2"
- 2U
- 2UN
- BSF2
- For M2
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- W2
- W/2
- 2'-11.5
- 2´-11.5
- 2'-11
- 2´-11
- 2′-11
- 2-8UN
- 2"1/2UN
- G2"1/2
- NPS2"1/2
- NPT2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/2
- 2'1/2-11
- 2´1/2-11
- 2′1/2-11
- 2´1/2-8
- 2"1/4UN
- BSF2"1/4
- NPS2"1/4
- NPT2"1/4
- R2"1/4
- W2"1/4
- 2′1/4-11
- W2"1/8
- 2"3/4UN
- R2"3/4
- W2"3/4
- W2"3/8
- 2'4.5UNC
- 2'W4.5
- M2～4.5
- W2"7/8
- M2～8
- M2～10
- 2'12UN
- M2.2
- M2.2-2.5
- M2.3
- For M2.5
- M2.5
- For M2.6
- M2.6
- 3M
- 3UN
- For M3
- G3
- M3
- M3.0
- NPS3
- NPT3
- No3UN
- R3
- Rp3
- W3
- 3´-11
- 3′-11
- 3´-8
- 3"1/2UN
- G3"1/2
- NPS3"1/2
- NPT3"1/2
- R3"1/2
- Rp3"1/2
- 3´1/2-11
- 3′1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF3/4
- PS3/4
- R3/4
- Rc3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- M3～5
- M3～6
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNJ
- 3/8W
- BC3/8
- G3/8
- M3 to 8
- M3~8
- M3～8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PS3/8
- PT3/8
- R3/8
- Rc3/8
- Rp3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- PT3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3～12
- 3/16
- 3/16UN
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- 3/32
- SM3/32
- W3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- 4UN
- For M4
- G4
- M4
- M4.0
- NPS4
- NPT4
- No4UN
- R4
- Rp4
- №4-40UNC
- 4´-11
- 4′-11
- 4M0.75
- W4"1/2
- M4～6
- M4～10
- M4～13
- M4～14
- M4.5
- 5
- 5M
- CTV5
- M5
- M5.0
- No5UN
- TV5
- №5-40UNC
- 5/1
- 5 to 8 mm
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- NPT5/8
- PS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5～10
- M5 - M12
- M5～12
- M5～13
- 5/16
- 5/16UN
- 5/16UNJ
- 5/16W
- BC5/16
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-32UNEF
- 5/16-24 UNF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32UN
- W5/32
- 5/32W32
- 5/64SM64
- 5.5M
- M5.5
- 6
- 6UN
- For M6
- M6
- M6.0
- No6UN
- No6UNJ
- W6
- No6-40UNF
- №6-32UNC
- M6～20
- M6.5
- W6.8
- M7
- PG7
- W7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- NPT7/8
- PS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- W"7/8
- 7/8-20UNEF
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- 7/32UN
- SM7/32
- W7/32
- 7/32W24
- 7/32SM32
- 7.5
- M7.5
- 8
- 8UN
- CTV8
- For M8
- M8
- M8.0
- No8UN
- No8UNJ
- TV8
- W8
- №8-32UNC
- 8 to 12 mm
- M8 to 12
- M8~12
- M8.5
- 9
- M9
- PG9
- 9/16
- 9/16UN
- BC9/16
- UNF9/16
- W9/16
- 9/16-24UNEF
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- 9/64
- SM9/64
- 9/64SM40
- M9.5
- W9.5
- W9.8
- 10
- 10UN
- M10
- M10.0
- No10UN
- No10UNJ
- TM10
- TR10
- TV10
- TW10
- W10
- №10-32UNF
- №10-24UNC
- M10～13
- M10～25
- M10～30
- 11
- M11
- PG11
- W11
- 11/16
- W11/16
- SM11/32
- 11/64
- SM11/64
- 11/64SM40
- 12
- M12
- M12.0
- M]12
- No12UN
- TM12
- TW12
- W12
- W12.5
- 13
- M13
- W13
- W13/16
- PG13.5
- W13.5
- W13.8
- M14
- M14.0
- TM14
- TW14
- W14
- 15
- M15
- W15
- W15/16
- 15/64
- SM15/64
- 15/64SM28
- 16
- M16
- M16.0
- PG16
- TM16
- TR16
- TW16
- W16
- 17
- M17
- W17
- M18
- M18.0
- TM18
- TW18
- W18
- 19
- M19
- W19
- M19～32
- M19～33
- M19～38
- M19～42
- 20
- M20
- M20.0
- TM20
- TR20
- TW20
- W20
- W20.32
- M21
- PG21
- W21
- 22
- M22
- M22.0
- M22X
- TM22
- TW22
- W22
- M23
- W23
- M24
- M24.0
- M24X
- TM24
- TW24
- W24
- 25
- M25
- M25X
- TM25
- TW25
- W25
- M25～50
- M25～60
- M25～70
- M25～72
- M26
- TM26
- TW26
- W26
- M27
- W27
- 28
- M28
- TM28
- TW28
- W28
- M29
- PG29
- W29
- M30
- TM30
- TW30
- W30
- 31
- 31/32
- M32
- TM32
- W32
- M33
- W33
- M34
- W34
- M35
- W35
- 36
- M36
- PG36
- TM36
- W36
- M37
- M38
- W38
- 39
- M39
- W39
- M40
- TM40
- W40
- 42
- M42
- PG42
- W42
- M42～120
- M43
- M44
- W44
- M45
- W45
- M46
- M48
- W48
- M50
- W50
- M52
- W52
- M54
- W54
- M55
- W55
- M56
- W56
- M58
- M60
- W60
- M62
- W62
- M64
- M65
- W65
- M68
- M70
- W70
- M72
- M75
- W75
- M76
- M78
- M80
- M82
- M85
- M90
- M95
- M100
- M110
- M115
- M120
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.34
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.5-2
- 1.75
- 2
- 2.5
- 3
- 3 1/2
- 3.5
- 4
- 4 1/2
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 60
- 64
- 72
- 80
- 150
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI_Test (0)
- YAMAWA MFG (14)
- OSG (2)
- NS TOOL (1)
- KANETEC (0)
- MIERASEN (0)
- NEW STRONG (0)
- GREENCROSS (0)
- EARTH MAN (0)
- KO-KEN TOOL (0)
- NIIGATA SEIKI (SK) (0)
- TSUBOSAN (0)
- SMATO (0)
- NOGA JAPAN (0)
- TRUSCO (0)
- NAKANISHI (0)
- HOZAN (0)
- ENGINEER (0)
- UNION TOOL (0)
- SK 11 (0)
- ISHIHASHI (0)
- SKC (0)
- RUKO (0)
- EIKOSHA (0)
- RENNSTEIG (0)
- DC SWISS (0)
- H & H (0)
- LIGHTSEIKI (0)
- SANDVIK (0)
- NACHI(FUJIKOSHI) (0)
- ONISHI MANUFACTURING (0)
- KUKKO (0)
- GUHRING (0)
- PROCHI (0)
- TANOI MFG (0)
- Brand ESCO (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy