Gaskets（Type：Sheet Gasket / Gasket）

• 

  EBILON Gasket TOMBO No. 90

  NICHIAS

  [Features]
  ●Gasket with superior sealing ability that has both the elasticity of rubber and corrosion resistance of fluororesin (PTFE).
  
  [Application]
  ●Ideal for use in PVC pipes or glass-lined pipes where large torque is not applied.

  Standard Price:	315,856 IDR-
  Days to Ship:	9 Day(s) or more

• 

  PTFE FF Packing

  AKITSU INDUSTRY

  An FF gasket (packing) to JIS standards for Teflon (PTFE) material. Various sizes from 15A to 100A are available.
  [Nominal diameter] 15A, 20A, 25A, 32A, 40A, 50A, 65A, 80A, 100A
  [JIS flange standard] 5K, 10K
  [Thickness] 1.5 mm, 2 mm, 3 mm

  Standard Price:	85,357 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Rubber Gasket, NBR (Standard)

  OZAWABUSSAN

  [Features]
  • Gasket that is equipped to a coupler as standard.
  • Used for water, fats, oils, etc.

  Standard Price:	52,316 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Union Packing (Non-Asbestos)【10 Pieces Per Package】

  AKITSU INDUSTRY

  A non-asbestos union gasket is available with thickness of 1.5 mm and sizes from 6A to 50A.
  [Nominal diameter] 6A, 8A, 10A, 15A, 20A, 25A, 32A, 40A, 50A
  [Thickness (mm)] 1.5mm

  Standard Price:	126,268 IDR-
  Days to Ship:	Same day or more

• 

  Joint Sheet CLINSIL Brown TOMBO No.1995 Entire-Surface Gasket

  NICHIAS

  A standard grade joint. Suitable for flanges and valves and in low-temperature equipment.

  • Volume Discount

  Standard Price:	25,492 IDR-
  Days to Ship:	7 Day(s) or more

• 

  Joint Sheet Clean Seal Brown TOMBO No. 1995 Link Gusset

  NICHIAS

  Standard grade joint. Suitable for use with low-temperature flanges and valves and in low-temperature equipment.
  
  [Features]
  · Standard grade joint.
  · Large diameter opening gasket.
  · A maximum size of 3810 x 3810 mm (9S size) can be fabricated without joints.
  · Suitable for use with relatively low-temperature flanges, valves, and equipment.
  · Primary composition: NBR, aramid fibers, inorganic fillers

  • Volume Discount

  Standard Price:	11,670 IDR-
  Days to Ship:	7 Day(s) or more

• 

  Rubber Gaskets for High Pressure

  JAPANMATEX

  ● Better heat resistant and life span compared to rubber products of the same materials; electrically insulating capabilities on par with PTFE
  ● General industrial flange gasket, gasket for seawater line piping and equipment, etc.

  Standard Price:	81,625 IDR
  Days to Ship:	2 Day(s)

• 

  PTFE Flange Packing JIS-10K

  FLONCHEMICAL

  [Features]
  ●Flange and bolt hole diameters conform to JIS standard size (bolt holes) for easy installation to existing flanges.
  ●Extremely soft and flexible to enable sealing at low torque.
  
  [Application]
  ●For piping
  

  Standard Price:	223,476 IDR
  Days to Ship:	2 Day(s)

• 

  Soft Teflon FF Packing S-PTFE

  AKITSU INDUSTRY

  An FF gasket (packing) to JIS standard s for soft Teflon (PTFE) materials. Various sizes from 15A to 50A are available.
  [Nominal diameter] 15 A, 20 A, 25 A, 32 A, 40 A, 50 A
  [JIS flange standard] 5K, 10K
  [Thickness] 3 mm, 50 A
  [JIS flange standard] 5K, 10K
  [Thickness] 3 mm

  Standard Price:	81,671 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Joint Sheet Clean Seal Brown TOMBO No. 1995 Union Gusset

  NICHIAS

  Standard grade joint. Suitable for use with low-temperature flanges and valves and in low-temperature equipment.
  
  [Features]
  · Standard grade joint.
  · Large diameter opening gasket. · A maximum size of 3810 x 3810 mm (9S size) can be fabricated without joints.
  · Suitable for use with relatively low-temperature flanges, valves, and equipment.

  • Volume Discount

  Standard Price:	7,183 IDR-
  Days to Ship:	7 Day(s) or more

• 

  Rubber Gasket, Fluorine Rubber

  OZAWABUSSAN

  [Features]
  • Gasket that is equipped to a coupler as standard.
  • Used for water, fats, oils, etc.

  Standard Price:	240,771 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Klinger High Temperature Mica Gasket Milam PSS

  AKITSU INDUSTRY

  Used for applications such as exhaust manifolds, gas turbines, high-temperature vapor, and exhaust gas. Maximum application up to 900°C.

  Standard Price:	139,168 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Fluorine Resin Gasket, PTFE

  OZAWABUSSAN

  [Features]
  • Accordion shaped low-cost fluorine resin gasket.
  • Due to lack of structural sealing properties and restorability, please consult the supplier before use.

  Standard Price:	230,451 IDR-
  Days to Ship:	9 Day(s) or more

• 

  ESLON Packing

  SEKISUI CHEMICAL

  [Features]
  ●Packing made from rubber (EPDM) with superior corrosion resistance. You can comfortably use it even under high water pressure as it is not corroded by acidic or alkaline chemicals, or by sea water.
  ●Maximum allowable temperature is 100ºC.
  ●Chemical piping in chemical plants, piping in semiconductor plants, seawater piping in fisheries plants, effluent treatment lines in food plants, etc.
  

  Standard Price:	56,342 IDR-
  Days to Ship:	10 Day(s) or more

• 

  10K Full Face Sealing Gasket EPDM

  ASAHIYUKIZAI

  An integrally molded product ensuring a smooth surface with no unevenness in its thickness.
  The two O-ring-shaped raised ridges prevent leakages, even if the surface pressure is low.
  The moderate hardness of the rubber provides a cushioning effect against thermal and piping stress.
  Made of high-quality virgin rubber, helping prolong its service life.

  Standard Price:	72,234 IDR-
  Days to Ship:	45 Day(s) or more

• 

  5K Full Face Sealing Gasket EPDM

  ASAHIYUKIZAI

  An integrally molded product ensuring a smooth surface with no unevenness in its thickness.
  The two O-ring-shaped raised ridges prevent leakages, even if the surface pressure is low.
  The moderate hardness of the rubber provides a cushioning effect against thermal and piping stress.
  Made of high-quality virgin rubber, helping prolong its service life.

  Standard Price:	71,250 IDR-
  Days to Ship:	35 Day(s) or more

• 

  Joint Sheet C-4430 for Klinger High Temperatures

  AKITSU INDUSTRY

  In addition to stress relaxation and capacity to resist pressure, the Klinger joint sheet has excellent resistance to oil, hydrocarbons, and water.
  
  [Features]
  · In addition to excellent stress relaxation and capacity to resist pressure, the Klinger joint sheet has excellent resistance to oil, hydrocarbons, water, and steam.

  Standard Price:	18,402 IDR-
  Days to Ship:	7 Day(s) or more

• 

  Klinger Expanded Graphite Gasket SLS-A/S

  AKITSU INDUSTRY

  Improved ease of handling by inserting SUS316 steel plate for reinforcement.
  
  [Features]
  ▪ In order to further improve the ease of use, insert the reinforced steel plate SUS316 of thickness .0.05 mm and adhere the expanded graphite to the steel plate

  Standard Price:	64,471 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Rubber FF Packing EPT

  AKITSU INDUSTRY

  This gasket (packing) is compatible with JIS standard for Ethylene propylene rubber (EPT) materials. Various sizes from 10A to 450A are available.
  [Nominal diameter] 10A, 15A, 20A, 25A, 32A, 40A, 50A, 65A, 80A, 90A, 100A, 125A, 150A, 175A, 200A, 225A, 250A, 300A, 350A, 400A, 450A
  [JIS flange standard] 10K
  [Thickness] 3 mm

  Standard Price:	44,670 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Fluororesin Gasket, Super PFA Seal

  OZAWABUSSAN

  [Features]
  • Gasket completely covered with O-ring shaped fluorine rubber using PFA.
  • Product features a strong resistance to chemicals, minimal changes in shape due to temperature differences and excellent performance for use at high temperatures.
  • Sizes range from 15 A to 50 A (1/2 "to 2").

  Standard Price:	467,810 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Fluororesin Gasket, FEP Lap Seal

  OZAWABUSSAN

  [Features]
  • This gasket is entirely coated with rubber using FEP.
  • The rubber material of the core portion employs a silicon and fluorine rubber, sized 21/2 " or greater.

  Standard Price:	859,969 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Fluororesin Gasket, PTFE

  OZAWABUSSAN

  [Features]
  • Accordion-shaped low-cost fluorine resin gasket.

  Standard Price:	1,427,568 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Water Supply Full Face Sealing Gasket SBR

  ASAHIYUKIZAI

  An integrally molded product ensuring a smooth surface with no unevenness in its thickness.
  The two O-ring-shaped raised ridges prevent leakages, even if the surface pressure is low.
  The moderate hardness of the rubber provides a cushioning effect against thermal and piping stress.
  Made of high-quality virgin rubber, helping prolong its service life.

  Standard Price:	117,690 IDR-
  Days to Ship:	45 Day(s) or more

Loading...