(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Screw-Hole-Related Tools

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

1,353 items

: 30; 45; 60

Days to Ship	All Same day 2 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less

1
2
3
4
5
Next >>

Hand Tap Series For General Use HT

OSG

An HSS hand tap.

Standard Price:	86,000 IDR-
Days to Ship:	2 Day(s) or more

Hand Tap HT (Cutting Tap)

YAMAWA MFG

Hand tap used for general tapping work.
[Features]
· High blade tip strength makes it suitable for work materials that are easily worn.
· More suitable for manual work compared to taps of other shapes.
· 2 types are available, with 5P or 1.5P biting threads.
· When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
· Machining with mechanical machinery is also possible.
· Has straight grooves out of consideration for scrap stow.
[Applications]
· Optimal for threading SPC/SPH and other thin steel plates or SS400/S20 or below mild steel.

Days to Ship: Same day or more

Days to Ship:	Same day or more

T-Shaped Ratchet Tap Holder

TRUSCO

[Features]
· Ratchet type with excellent workability.
· Forward/reverse rotation can be switched for efficient threading.
[Applications]
· For tap threading.

Standard Price:	428,832 IDR-
Days to Ship:	2 Day(s)

Taper Tap Series for Pipes General Use TPT

OSG

Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes

Standard Price:	286,506 IDR-
Days to Ship:	2 Day(s) or more

Parallel Tap Series for Pipes General Use SPT

OSG

Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.

Standard Price:	237,482 IDR-
Days to Ship:	Same day or more

Hand Tap Series Carbide High Hardness Steel Hand Tap VX-OT

OSG

Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher

Standard Price:	1,315,609 IDR-
Days to Ship:	8 Day(s) or more

Parallel Tap Series for Pipes Stainless Steel-Use Spiral Tap SUS-SFT-SPT

OSG

[Specifications]
· Shape: Pipe tap
· Screw type: pipe parallel
· Coating: Non-Coated
· Work Material: Stainless Steel (SUS) [◎] / Copper (Cu) [○]

Volume Discount

Standard Price:	401,672 IDR-
Days to Ship:	8 Day(s) or more

Spiral Tap Series, General Purpose EX-SFT

OSG

Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.

Volume Discount

Standard Price:	115,965 IDR-
Days to Ship:	2 Day(s) or more

Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

OSG

Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes

Volume Discount

Standard Price:	1,044,316 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Interlap Type (PT) EX-IRT-PT

OSG

[Specifications]
· Shape: Pipe tap
· Screw type: pipe taper
· Coating: Non-Coated
· Work Material: Low-Carbon Steel (less than 0.25% carbon alloy) [○] / Stainless Steel (SUS) [◎] / Cast Steel (SC) [○]

Volume Discount

Standard Price:	406,906 IDR-
Days to Ship:	8 Day(s) or more

Point Tap PO(N-PO)

YAMAWA MFG

A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.

Days to Ship: 7 Day(s) or more

Days to Ship:	7 Day(s) or more

Taper Tap Series for Pipes General Use Short Screw S-TPT

OSG

Used to process tapered female pipe threads. Short threading type used for tapping short thread lengths such as those for elbows and tees

Standard Price:	305,335 IDR-
Days to Ship:	2 Day(s) or more

Grooveless Tap Series TiN Coating TIN-NRT

OSG

Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

Volume Discount

Standard Price:	270,318 IDR-
Days to Ship:	7 Day(s) or more

Spiral Tap For Soft Steel / Esper E-SP

YAMAWA MFG

A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).

Volume Discount

Standard Price:	124,566 IDR-
Days to Ship:	8 Day(s) or more

Ratchet Type Tap Holders

NIIGATA SEIKI (SK)

A ratchet-type tap wrench that makes tapping easy.
[Features]
· Easy-to-use T-shaped handle specification, enabling operation with one hand.
· Tapping is easy even in narrow places.
· Can be switched among right, left, and fixed types.
[Applications]
· A wrench used for tapping.

Standard Price:	399,779 IDR-
Days to Ship:	Same day or more

Carbide Hand Tap m_series_language_23981

MiSUMi Economy

Carbide Hand Tap m_series_language_23981

MISUMI_Test

Carbide taps with dramatically improved tool life

Volume Discount

Standard Price:	450,732 IDR-
Days to Ship:	8 Day(s) or more

High-Speed Steel Hand Tap m_series_language_23982

MiSUMi Economy

High-Speed Steel Hand Tap m_series_language_23982【10 Pieces Per Package】

MISUMI_Test

Limited special price is available for the standard sizes

Volume Discount

Standard Price:	354,146 IDR-
Days to Ship:	8 Day(s) or more

Tap handle

TRUSCO

[Features]
· A straight-type handle for hand tap and hand reamer.
[Applications]
· For tapping.

Standard Price:	143,550 IDR-
Days to Ship:	2 Day(s)

Hand Tap Set (for Metric Thread Screw)

ISHIHASHI

[Features]
· A tungsten hand tap set.
· Can be used for both through holes and blind holes.
· Economical compared to HSS.
[Applications]
· Work materials: Iron, light metal.
[Material]
· Alloy tool steel (SKS2)

Standard Price:	201,409 IDR-
Days to Ship:	2 Day(s) or more

SG Spiral Tap SGSP

NACHI(FUJIKOSHI)

[Features]
・ Exhibits excellent performance across a wide range of cutting conditions, machinery, and work materials.

Standard Price:	317,599 IDR-
Days to Ship:	9 Day(s) or more

Taper Tap Series for Pipes Stainless Steel-Use Spiral Tap SUS-SFT-TPT

OSG

[Specifications]
· Shape: Pipe tap
· Screw type: pipe taper
· Coating: Non-Coated
· Work Material: Stainless Steel

Standard Price:	523,627 IDR-
Days to Ship:	8 Day(s) or more

Threading Round Die Series Pipe General Threading Round Die RD-H

OSG

[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: HSS

Volume Discount

Standard Price:	1,086,981 IDR-
Days to Ship:	8 Day(s) or more

Hand Tap (for Metric Thread)

ISHIHASHI

[Features]
· Tungsten hand tap.
· A common tap that's used in various applications.
· Economical compared to HSS.
[Applications]
· Work materials: Iron, light metal.
[Material]
· Alloy tool steel (SKS2)

Standard Price:	99,452 IDR-
Days to Ship:	7 Day(s) or more

Point Tap Series, General Purpose EX-POT

OSG

For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way

Volume Discount

Standard Price:	113,061 IDR-
Days to Ship:	Same day or more

Point Tap Series For General Purpose Homo Processing EX-H-POT

OSG

For standard point taps, it is used when the protruding length of the screw is insufficient.

Standard Price:	121,550 IDR-
Days to Ship:	2 Day(s) or more

Taper Tap Series for Pipes Taper Tap for Carbide Pipes, Long Shank OT-LT-TPT

OSG

Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.

Standard Price:	3,523,787 IDR-
Days to Ship:	8 Day(s) or more

Solid Die D for Metric Threads

YAMAWA MFG

Solid die with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Solves problems particular to adjustable type dies, realizing high precision screw machining.
[Applications]
· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
· Combining with NC tooling enables machining with a MC.

Volume Discount

Standard Price:	624,028 IDR-
Days to Ship:	Same day or more

Spiral Tap Series, for Soft Steel, Deep Holes MS-DH-SFT

OSG

Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.

Standard Price:	120,656 IDR-
Days to Ship:	2 Day(s) or more

Hand Tap

Hand Tap【1-3 Pieces Per Package】

ISHIHASHI

Tap Used for General Screw Thread Cutting

Standard Price:	92,598 IDR-
Days to Ship:	11 Day(s) or more

Model A Tap Series, Spiral Tap A-SFT

OSG

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

Volume Discount

Standard Price:	257,586 IDR-
Days to Ship:	Same day or more

Point Tap Series For Stainless Steel EX-SUS-POT

OSG

With excellent sharpness and durability, it is used for stainless steel through holes where poor machinability is a problem. Besides stainless steel, it is also suitable for various heat resistant steels and strong nickel chrome manganese steel.

Standard Price:	154,386 IDR-
Days to Ship:	9 Day(s) or more

Taper Tap Series for Pipes General Use Oxidizing H-TPT

OSG

Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes

Standard Price:	343,809 IDR-
Days to Ship:	9 Day(s) or more

Short Spiral Tap for Stainless Steel SU-S-SP

YAMAWA MFG

[Features]
· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.

Volume Discount

Standard Price:	194,520 IDR-
Days to Ship:	8 Day(s) or more

TiN Coated High-Speed Steel Spiral Tap m_series_language_23973

MiSUMi Economy

TiN Coated High-Speed Steel Spiral Tap m_series_language_23973【1-5 Pieces Per Package】

MISUMI_Test

The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available

Volume Discount

Standard Price:	160,975 IDR-
Days to Ship:	8 Day(s) or more

Model A Tap Series, Point Tap A-POT

OSG

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

Volume Discount

Standard Price:	257,586 IDR-
Days to Ship:	8 Day(s) or more

Stainless Steel Hand Tap SU-HT

YAMAWA MFG

Hand tap suitable for machining extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 5 m/min or less is recommended.
[Applications]
Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.

Days to Ship: 7 Day(s) or more

Days to Ship:	7 Day(s) or more

Spiral Flute Tap SP (N-SP)

YAMAWA MFG

The spiral tap is ideal for machining blind holes as scrap is discharged from the grooves twisted in the same direction as the threads.
[Features]
· The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
· Intermittent cutting of female threads with key groove is also possible.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining blind holes.
* N-SP models will transition to SP as soon as stock runs out.

Standard Price:	89,999 IDR-
Days to Ship:	7 Day(s) or more

Hand Tap for Cast Iron FC-HT

YAMAWA MFG

[Features]
· Suitable for thread machining with brittle and hard materials such as cast iron, designed appropriately oversized to handle rapid wear.

Standard Price:	137,023 IDR-
Days to Ship:	11 Day(s) or more

High-Speed Steel Spiral Tap m_series_language_23975

MiSUMi Economy

High-Speed Steel Spiral Tap m_series_language_23975【10 Pieces Per Package】

MISUMI_Test

Limited special price is available for the standard sizes

Volume Discount

Standard Price:	695,166 IDR-
Days to Ship:	8 Day(s) or more

Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

OSG

For standard spiral taps, it is used when the protruding length of the screw is insufficient.

Standard Price:	222,462 IDR-
Days to Ship:	7 Day(s) or more

Hand Tap Series For Oversize EX-OST

OSG

Since it is oversized compared to the hand tap (HT), it has a long life with work material which tends to shrink, and it can machine a JIS2 grade female screw.

Standard Price:	113,061 IDR-
Days to Ship:	2 Day(s) or more

Grooveless Tap Series VP New Roll VP-NRT

OSG

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Volume Discount

Standard Price:	296,900 IDR-
Days to Ship:	8 Day(s) or more

Hand Tap Set (for metric screws/HSS-E)

TRUSCO

[Features]
· Can be used for both through holes and blind holes.
· It is a high-speed steel (HSS-E) tap set.
[Applications]
· Work materials: General steel, low/medium carbon steel, alloy steel.

Standard Price:	269,724 IDR-
Days to Ship:	2 Day(s)

Tap handle (made of iron)

TRUSCO

[Features]
· A straight-type handle for hand tap and hand reamer.
· The body is made of iron, stronger and more durable than zinc die casting.
[Applications]
· For tapping.

Standard Price:	214,746 IDR-
Days to Ship:	2 Day(s) or more

IT-Toughlet TiCN Coated

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Standard Price:	348,582 IDR-
Days to Ship:	11 Day(s) or more


Brand
Product Series
Days to Ship
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)


Brand	OSG	YAMAWA MFG	TRUSCO	OSG	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	OSG	OSG	YAMAWA MFG	NIIGATA SEIKI (SK)	MISUMI_Test MiSUMi Economy	MISUMI_Test MiSUMi Economy	TRUSCO	ISHIHASHI	NACHI(FUJIKOSHI)	OSG	OSG	ISHIHASHI	OSG	OSG	OSG	YAMAWA MFG	OSG	ISHIHASHI	OSG	OSG	OSG	YAMAWA MFG	MISUMI_Test MiSUMi Economy	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	MISUMI_Test MiSUMi Economy	OSG	OSG	OSG	TRUSCO	TRUSCO	TANOI MFG
Product Series	Hand Tap Series For General Use HT	Hand Tap HT (Cutting Tap)	T-Shaped Ratchet Tap Holder	Taper Tap Series for Pipes General Use TPT	Parallel Tap Series for Pipes General Use SPT	Hand Tap Series Carbide High Hardness Steel Hand Tap VX-OT	Parallel Tap Series for Pipes Stainless Steel-Use Spiral Tap SUS-SFT-SPT	Spiral Tap Series, General Purpose EX-SFT	Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC	Taper Tap Series for Pipes Interlap Type (PT) EX-IRT-PT	Point Tap PO(N-PO)	Taper Tap Series for Pipes General Use Short Screw S-TPT	Grooveless Tap Series TiN Coating TIN-NRT	Spiral Tap For Soft Steel / Esper E-SP	Ratchet Type Tap Holders	Carbide Hand Tap m_series_language_23981	High-Speed Steel Hand Tap m_series_language_23982【10 Pieces Per Package】	Tap handle	Hand Tap Set (for Metric Thread Screw)	SG Spiral Tap SGSP	Taper Tap Series for Pipes Stainless Steel-Use Spiral Tap SUS-SFT-TPT	Threading Round Die Series Pipe General Threading Round Die RD-H	Hand Tap (for Metric Thread)	Point Tap Series, General Purpose EX-POT	Point Tap Series For General Purpose Homo Processing EX-H-POT	Taper Tap Series for Pipes Taper Tap for Carbide Pipes, Long Shank OT-LT-TPT	Solid Die D for Metric Threads	Spiral Tap Series, for Soft Steel, Deep Holes MS-DH-SFT	Hand Tap【1-3 Pieces Per Package】	Model A Tap Series, Spiral Tap A-SFT	Point Tap Series For Stainless Steel EX-SUS-POT	Taper Tap Series for Pipes General Use Oxidizing H-TPT	Short Spiral Tap for Stainless Steel SU-S-SP	TiN Coated High-Speed Steel Spiral Tap m_series_language_23973【1-5 Pieces Per Package】	Model A Tap Series, Point Tap A-POT	Stainless Steel Hand Tap SU-HT	Spiral Flute Tap SP (N-SP)	Hand Tap for Cast Iron FC-HT	High-Speed Steel Spiral Tap m_series_language_23975【10 Pieces Per Package】	Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT	Hand Tap Series For Oversize EX-OST	Grooveless Tap Series VP New Roll VP-NRT	Hand Tap Set (for metric screws/HSS-E)	Tap handle (made of iron)	IT-Toughlet TiCN Coated
Days to Ship	2 Day(s) or more	Same day or more	2 Day(s)	2 Day(s) or more	Same day or more	8 Day(s) or more	8 Day(s) or more	2 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	2 Day(s) or more	7 Day(s) or more	8 Day(s) or more	Same day or more	8 Day(s) or more	8 Day(s) or more	2 Day(s)	2 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	Same day or more	2 Day(s) or more	8 Day(s) or more	Same day or more	2 Day(s) or more	11 Day(s) or more	Same day or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	11 Day(s) or more	8 Day(s) or more	7 Day(s) or more	2 Day(s) or more	8 Day(s) or more	2 Day(s)	2 Day(s) or more	11 Day(s) or more
Screw Types	Meter / unified / Whitworth / Sewing Machine	Meter / unified / Sewing Machine	-	Taper for Pipe	Parallel for Pipes	Meter	Parallel for Pipes	Meter / unified	Meter / unified	Taper for Pipe	Meter / unified / Whitworth / Sewing Machine	Taper for Pipe	Meter / unified	Meter	-	Meter	Meter	-	Meter	Meter	Taper for Pipe	Meter / Whitworth	Meter	Meter / unified / Whitworth / Sewing Machine	Meter	Taper for Pipe	Meter	Meter / unified	Meter / unified / Whitworth	Meter / unified	unified / Whitworth	Taper for Pipe	Meter	Meter	Meter / unified	Meter / unified / Whitworth	Meter / unified / Whitworth / Sewing Machine	Meter	Meter	Meter / Whitworth	Meter	Meter / unified	Meter	-	Meter
Screw size (Nominal)	No0UN ～ M100	No.0-80UNF ～ M48	M3～10 ～ M5～13	R1 ～ R7/8	G1 ～ G7/8	M2 ～ M20	G1 ～ G3/8	1UN ～ M56	-	R1 ～ R7/8	No.0-80UNF ～ M48	R1 ～ R3/8	No0UN ～ M20	M3 ～ M24	-	M3 ～ M10	M3 ～ M10	M1～6 ～ M25～70	M3 ～ M12	M2 ～ M24	G1 ～ G3/8	W1 ～ M25	M3 ～ M20	No0UN ～ M48	M1.4 ～ M42	R1 ～ R3/8	M1 ～ M50	1/2UN ～ M42	1/4UN ～ M20	No.10-24UNC ～ M56	1UN ～ No10UN	R1 ～ R7/8	M3 ～ M20	M3 ～ M10	No.10-32UNF ～ M24	1/2-20UNF ～ M30	No.1-64UNC ～ M48	-	M2 ～ M12	W1 ～ M36	M3 ～ M20	M1 ～ M12	M3 ～ M16	M1～6 ～ M10～25	M1 ～ M10
Pitch (P), Number of Threading(mm)	0.25 ～ 80	0.2 ～ 7	-	8 ～ 28	11 ～ 28	0.4 ～ 2.5	11 ～ 28	0.25 ～ 48	0.25 ～ 32	11 ～ 28	0.25 ～ 7	11 ～ 28	0.25 ～ 80	0.5 ～ 3	-	0.5 ～ 1.5	0.5 ～ 1.5	-	0.6 ～ 1.75	0.25 ～ 3	11 ～ 28	0.35 ～ 40	0.5 ～ 2.5	0.25 ～ 80	0.3 ～ 4.5	11 ～ 28	0.2 ～ 5	0.4 ～ 48	0.4 ～ 28	0.25 ～ 5.5	8 ～ 48	11 ～ 28	0.5 ～ 2.5	0.5 ～ 1.5	0.25 ～ 3	0.4 ～ 3.5	0.25 ～ 7	-	0.4 ～ 1.75	0.4 ～ 20	0.5 ～ 2.5	0.25 ～ 56	0.5 ～ 2	-	0.2 ～ 1.5
Chamfer threads (Lcf)	1.5P ～ 9P	1.5P ～ 9P	-	2.5P	1.5P ～ 4P	3P	2.5P	2.5 ～ 3P	-	2.5P	5P	2.5P	2P ～ 4P	2.5P	-	1.5 P ～ 3P	1.5 P ～ 9P	-	-	1.5 ～ 2.5	2.5P	-	-	5P	5P	2.5P	-	2.5P	1.5P ～ 5P	1.5P ～ 2.5P	4P	2.5P	2.5P	1.5 P ～ 2.5P	5P	1.5P ～ 4P	2.5P	1.5P ～ 5P	2.5 P ～ 2.5P	2.5P	1.5P ～ 5P	2P ～ 4P	-	-	1P ～ 4P
Tool Material Type	High-speed steel	High-speed steel	-	High-speed steel	High-speed steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	High-speed steel	-	Carbide	Vanadium High-Speed Steel	-	-	Alloy HSS	Vanadium High-Speed Steel	High-speed steel	-	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	High-speed steel	Vanadium High-Speed Steel	-	Powder high-speed steel / Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	-	High-speed steel
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	High Hardness Steel (50-60 HRC)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○]	-	Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○/◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Stainless steel (SUS)[◎]	-	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Copper (Cu)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]
Tap Type	Hand Tap	Hand Tap	Tap wrench	Tap for pipes	Tap for pipes	Hand Tap	Spiral Tap	Spiral Tap	Thread cutter	Tap for pipes	Point tap	Tap for pipes	Roll tap	Spiral Tap	Tap wrench	Hand Tap	Hand Tap	Tap wrench	Hand Tap	Spiral Tap	Spiral Tap	Die	Hand Tap	Point tap	Point tap	Tap for pipes	Die	Spiral Tap	Hand Tap	Spiral Tap	Point tap	Tap for pipes	Spiral Tap	Spiral Tap	Point tap	Hand Tap	Spiral Tap	Hand Tap	Spiral Tap	Spiral Tap	Hand Tap	Roll tap	Hand Tap	Tap wrench	Roll tap
Hole type	For through hole / For blind hole	For through hole / For blind hole	-	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	-	For through hole / For blind hole	For through hole / For blind hole	-	-	For through hole / For blind hole	For blind hole	-	-	For through hole	For through hole	For through hole / For blind hole	-	For blind hole	-	For blind hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	-	-
Coating Y/N	NA	NA	-	NA	NA	Available	NA	NA	Available	NA	NA	NA	Available	NA	-	NA	NA	-	-	Available	NA	NA	-	NA	NA	NA	NA	NA	NA	Available	NA	NA	NA	Available	Available	NA	NA	Available	NA	NA	NA	Available	NA	-	Available
Coating Type	Non-Coated	-	-	Non-Coated	Non-Coated	TiCN / Other	Non-Coated	Non-Coated	For High Hardness (Silicon Group) / Other	Non-Coated	-	Non-Coated	TiN	-	-	-	-	-	Non-Coated	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	Non-Coated	Non-Coated	Other	Non-Coated	Non-Coated	-	TiN	Other	-	-	Nitriding Treatment	-	Non-Coated	Non-Coated	TiCN	Non-Coated	-	TiCN
Overall Length (L)(mm)	30 ～ 275	36 ～ 185	85 ～ 315	55 ～ 170	55 ～ 170	40 ～ 105	55 ～ 95	30 ～ 205	40	55 ～ 155	36 ～ 200	55 ～ 155	30 ～ 105	46 ～ 120	-	46 ～ 75	46 ～ 75	170 ～ 1250	-	40 ～ 120	55 ～ 95	-	46 ～ 105	30 ～ 185	34 ～ 175	100 ～ 150	-	40 ～ 175	40 ～ 100	34 ～ 250	44 ～ 125	55 ～ 110	46 ～ 105	46 ～ 150	34 ～ 120	42 ～ 135	36 ～ 250	-	40 ～ 82	80 ～ 300	46 ～ 105	30 ～ 82	46 ～ 95	170 ～ 460	30 ～ 75