(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Screw-Hole-Related Tools（Page3）

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

1,353 items

: 30; 45; 60

Days to Ship	All Same day 2 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less

Hand Tap / Drill Set

Hand Tap / Drill Set【21 Pieces Per Package】

ISHIHASHI

Set of 14 Medium Hand Taps and 7 Pilot Hole Drills in Case

Standard Price:	2,915,962 IDR
Days to Ship:	2 Day(s)

Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

GUHRING

[Features]
· Threading is performed with helical cutting.
· If the pitch is the same, one unit can process threads with different diameters.
· Both right-handed and left-handed female threads can be machined.

Standard Price:	20,800 IDR-
Days to Ship:	13 Day(s) or more

Spiral Tap for Stainless Steel SU+SP/SU-SP

YAMAWA MFG

Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.

Volume Discount

Standard Price:	131,883 IDR-
Days to Ship:	Same day or more

Hand Tap for Left-Hand Threads HT(LH)

YAMAWA MFG

It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.

Days to Ship: 7 Day(s) or more
Long Shank Hand Tap LS-HT

YAMAWA MFG

It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.

Days to Ship: 7 Day(s) or more
For Tapered Screw for Pipe (Long Screw Type) PT

YAMAWA MFG

A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes

Days to Ship: 7 Day(s) or more

Days to Ship:	7 Day(s) or more

Days to Ship:	7 Day(s) or more

Days to Ship:	7 Day(s) or more

Point Tap For High Carbon Steel HC+PO/HC-PO

YAMAWA MFG

It is suitable for tapping high carbon steel such as S55C.

Standard Price:	111,194 IDR-
Days to Ship:	7 Day(s) or more

Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP

YAMAWA MFG

Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

Standard Price:	147,942 IDR-
Days to Ship:	7 Day(s) or more

Model A Tap Series, Long Shank Spiral Tap A-LT-SFT

OSG

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

Standard Price:	461,081 IDR-
Days to Ship:	8 Day(s) or more

Hand Tap Set (For Whitworth Screws / SKS)

TRUSCO

[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying screw threads.
· Tungsten hand tap set.
[Applications]
· Work materials: iron, light metals.

Standard Price:	162,878 IDR-
Days to Ship:	2 Day(s) or more

Tap Die Fine and Coarse Set EA829VX-3

Brand ESCO

【Product Specifications】
・Material…Alloy steel
・Begin・finish tap 35 pcs, dice 35 pcs
・Size…(Metric coarse/fine thread)M2x0.4・M3x0.5・M4x0.7・M5x0.8・M6x1.0・M6x0.75・M7x1.0・M7x0.75・M8x1.25・M8x1.0・M8x0.75・M9x1.25・M9x1.0・M9x0.75・M10x1.5・M10x1.25・M10x1.0・M10x0.75・M11x1.5・M11x1.25・M11x1.0・M11x0.75・M12x1.75・M12x1.5・M12x1.25・M12x1.0・M12x0.75・M14x2.0・M14x1.5・M14x1.25・M14x1.0・M16x2.0・M16x1.5・M16x1.0・M18x1.5
・Tap handle2pcs., Dies handle2pcs.
・T-shaped tap handle
・Case size…440x330x50(T)mm

Volume Discount

Standard Price:	5,011,041 IDR
Days to Ship:	8 Day(s) or more

Solid Die (For Left-Handed Threads) D LH for Unified Threads

YAMAWA MFG

Standard Price:	1,504,665 IDR-
Days to Ship:	13 Day(s) or more

TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads m_series_language_23967

MISUMI_Test

The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.

Volume Discount

Standard Price:	3,673,918 IDR-
Days to Ship:	10 Day(s) or more

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads m_series_language_23968

MISUMI_Test

Threading cutters that enable the high-speed stable processing are available at special prices

Volume Discount

Standard Price:	2,915,283 IDR-
Days to Ship:	10 Day(s) or more

TS Coated Carbide Threading Cutter, for Internal Metric Threads m_series_language_23969

MISUMI_Test

TS coating type of the popular threading cutter

Volume Discount

Standard Price:	2,522,820 IDR-
Days to Ship:	8 Day(s) or more

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported m_series_language_23972

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported m_series_language_23972【5 Pieces Per Package】

MISUMI_Test

Supports all work materials from general steel to difficult-to-cut materials

Volume Discount

Standard Price:	527,222 IDR-
Days to Ship:	8 Day(s) or more

High-Speed Steel Point Tap m_series_language_23979

MiSUMi Economy

High-Speed Steel Point Tap m_series_language_23979【10 Pieces Per Package】

MISUMI_Test

Limited special price is available for the standard sizes

Volume Discount

Standard Price:	600,698 IDR-
Days to Ship:	8 Day(s) or more

Tap Series for Insert Screw Hand tap HL-HT

OSG

Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.

Standard Price:	179,627 IDR-
Days to Ship:	9 Day(s) or more

Spiral Tap Series, for Stainless Steel, Deep Holes SUS-DH-SFT

OSG

Ideal for deep-hole processing of stainless steel over 2D

Standard Price:	139,972 IDR-
Days to Ship:	8 Day(s) or more

Spiral Tap Series, Carbide Spiral Tap OT-SFT

OSG

Ideal for tapping a large number of blind holes with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, thermoplastic, etc.

Volume Discount

Standard Price:	1,127,189 IDR-
Days to Ship:	8 Day(s) or more

Hand Tap Series For Stainless Steel EX-SUS-HT

OSG

Suitable for stainless steel, heat resistant steel, nickel manganese steel, and others. Suitable for carbon steel and alloy steel materials.

Standard Price:	119,065 IDR-
Days to Ship:	Same day or more

Hand Tap Series For General Use Long Shank EX-LT

OSG

Long shank type.

Standard Price:	195,880 IDR-
Days to Ship:	9 Day(s) or more

Hand Tap Series For Resin EX-PLA-HT

OSG

Suitable for thermosetting resins such as phenol (bakelite), epoxy, urea, and melamine.

Standard Price:	128,028 IDR-
Days to Ship:	2 Day(s) or more

Hand Tap Series For Cast Iron EX-FC-HT

OSG

Suitable for all kinds of cast iron, such as gray cast iron, spheroidal graphite cast iron, and malleable cast iron, as well as brass castings.

Standard Price:	115,519 IDR-
Days to Ship:	2 Day(s) or more

Hand Tap Series For Difficult-To-Cut Materials CPM-HT

OSG

The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Standard Price:	169,352 IDR-
Days to Ship:	8 Day(s) or more

Planet Cutter Series Super Planet DR-PNAC

OSG

A composite tool capable of pilot drilling + chamfering + female threading, that eliminates the need for tool exchange, reduces time between machining, and improves productivity

Standard Price:	5,757,103 IDR-
Days to Ship:	9 Day(s) or more

Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

OSG

Enables efficient chip discharge by discharging cutting fluid from the oil holes.

Standard Price:	3,342,408 IDR-
Days to Ship:	9 Day(s) or more

Point Tap Series TiN Coating TIN-POT

OSG

Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

Volume Discount

Standard Price:	170,353 IDR-
Days to Ship:	8 Day(s) or more

Point Tap Series TiN Coating Long Shank TIN-LT-POT

OSG

Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

Volume Discount

Standard Price:	387,591 IDR-
Days to Ship:	8 Day(s) or more

Point Tap Series V Coating V-POT

OSG

Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

Standard Price:	280,252 IDR-
Days to Ship:	8 Day(s) or more

Point Tap Series For Aluminum High Speed Synchro Tap HS-AL-RFT

OSG

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.

Standard Price:	181,191 IDR-
Days to Ship:	8 Day(s) or more

Point Tap Series For Stainless Steel Use EX-SUS-POT

OSG

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Standard Price:	131,825 IDR-
Days to Ship:	2 Day(s) or more

Point Tap Series For Deep Holes EX-DH-POT

OSG

Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.

Standard Price:	131,825 IDR-
Days to Ship:	2 Day(s) or more

Taper Tap Series for Pipes V Coating, Cemented Carbide (for high hardness steel) VX-TPT

OSG

Excellent for hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC to 60 HRC or higher

Standard Price:	3,289,915 IDR-
Days to Ship:	9 Day(s) or more

Taper Tap Series for Pipes Long Shank for Stainless Steel LT-SUS-TPT

OSG

It is suitable for hard-to-cut materials, such as stainless steel.

Standard Price:	629,954 IDR-
Days to Ship:	9 Day(s) or more

Taper Tap Series for Pipes Spiral Tap Short Screw for Stainless Steel SUS-SFT-S-TPT

OSG

It is suitable for hard-to-cut materials, such as stainless steel.

Standard Price:	485,087 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Short Screw for Stainless Steel EX-SUS-S-TPT

OSG

It is suitable for hard-to-cut materials, such as stainless steel.

Standard Price:	387,591 IDR-
Days to Ship:	8 Day(s) or more

Grooveless Tap Series TiN Coating, Roughing TIN-LT-NRT

OSG

Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

Standard Price:	378,209 IDR-
Days to Ship:	8 Day(s) or more

Grooveless Tap Series VP New Roll, Long Shank Type VP-LT-NRT

OSG

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Standard Price:	378,209 IDR-
Days to Ship:	8 Day(s) or more

Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT

OSG

Highly accurate, ultra-high-speed female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.

Standard Price:	301,591 IDR-
Days to Ship:	9 Day(s) or more

Grooveless Tap Series Carbide New Roll Tap OT-NRT

OSG

Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.

Volume Discount

Standard Price:	1,337,162 IDR-
Days to Ship:	8 Day(s) or more

MMTS Micro Threading Tool

NS TOOL

Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken

Standard Price:	1,151,422 IDR-
Days to Ship:	11 Day(s) or more

Spiral Tap (for metal screws)

TRUSCO

[Features]
· A spiral tap for general steel.
[Applications]
· For blind hole machining.
· Work materials: General steel, low/medium carbon steel, alloy steel.

Standard Price:	99,090 IDR-
Days to Ship:	2 Day(s)

Hand Tap (for metric screws/HSS-E)

TRUSCO

[Features]
· Can be used for both through holes and blind holes.
[Applications]
· Work materials: General steel, low/medium carbon steel, alloy steel.

Standard Price:	81,726 IDR-
Days to Ship:	2 Day(s) or more

Round Die for Metric Screw

TRUSCO

[Features]
· Dimensional adjustments can be made with the adjustment screw provided.
· Can also be used to modify screw threads.
· For round dies.
[Applications]
· Work materials: iron, light metals.
· For male threading.
· Correction of coarse screw threads.

Standard Price:	270,570 IDR-
Days to Ship:	2 Day(s) or more


Brand
Product Series
Days to Ship
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)


Brand	ISHIHASHI	GUHRING	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	TRUSCO	Brand ESCO	YAMAWA MFG	MISUMI_Test	MISUMI_Test	MISUMI_Test	MISUMI_Test	MISUMI_Test MiSUMi Economy	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	TRUSCO	TRUSCO	TRUSCO
Product Series	Hand Tap / Drill Set【21 Pieces Per Package】	Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737	Spiral Tap for Stainless Steel SU+SP/SU-SP	Hand Tap for Left-Hand Threads HT(LH)	Long Shank Hand Tap LS-HT	For Tapered Screw for Pipe (Long Screw Type) PT	Point Tap For High Carbon Steel HC+PO/HC-PO	Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP	Model A Tap Series, Long Shank Spiral Tap A-LT-SFT	Hand Tap Set (For Whitworth Screws / SKS)	Tap Die Fine and Coarse Set EA829VX-3	Solid Die (For Left-Handed Threads) D LH for Unified Threads	TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads m_series_language_23967	TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads m_series_language_23968	TS Coated Carbide Threading Cutter, for Internal Metric Threads m_series_language_23969	Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported m_series_language_23972【5 Pieces Per Package】	High-Speed Steel Point Tap m_series_language_23979【10 Pieces Per Package】	Tap Series for Insert Screw Hand tap HL-HT	Spiral Tap Series, for Stainless Steel, Deep Holes SUS-DH-SFT	Spiral Tap Series, Carbide Spiral Tap OT-SFT	Hand Tap Series For Stainless Steel EX-SUS-HT	Hand Tap Series For General Use Long Shank EX-LT	Hand Tap Series For Resin EX-PLA-HT	Hand Tap Series For Cast Iron EX-FC-HT	Hand Tap Series For Difficult-To-Cut Materials CPM-HT	Planet Cutter Series Super Planet DR-PNAC	Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC	Point Tap Series TiN Coating TIN-POT	Point Tap Series TiN Coating Long Shank TIN-LT-POT	Point Tap Series V Coating V-POT	Point Tap Series For Aluminum High Speed Synchro Tap HS-AL-RFT	Point Tap Series For Stainless Steel Use EX-SUS-POT	Point Tap Series For Deep Holes EX-DH-POT	Taper Tap Series for Pipes V Coating, Cemented Carbide (for high hardness steel) VX-TPT	Taper Tap Series for Pipes Long Shank for Stainless Steel LT-SUS-TPT	Taper Tap Series for Pipes Spiral Tap Short Screw for Stainless Steel SUS-SFT-S-TPT	Taper Tap Series for Pipes Short Screw for Stainless Steel EX-SUS-S-TPT	Grooveless Tap Series TiN Coating, Roughing TIN-LT-NRT	Grooveless Tap Series VP New Roll, Long Shank Type VP-LT-NRT	Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT	Grooveless Tap Series Carbide New Roll Tap OT-NRT	MMTS Micro Threading Tool	Spiral Tap (for metal screws)	Hand Tap (for metric screws/HSS-E)	Round Die for Metric Screw
Days to Ship	2 Day(s)	13 Day(s) or more	Same day or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more	2 Day(s) or more	8 Day(s) or more	13 Day(s) or more	10 Day(s) or more	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Same day or more	9 Day(s) or more	2 Day(s) or more	2 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s) or more	2 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	8 Day(s) or more	11 Day(s) or more	2 Day(s)	2 Day(s) or more	2 Day(s) or more
Screw Types	-	Meter	Meter / unified / Whitworth	Meter	Meter / unified	Taper for Pipe	Meter	Meter	Meter	Whitworth	-	unified	Meter	Meter	Meter	Meter	Meter	Meter / unified	Meter	Meter	Meter	Meter / unified / Whitworth	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter / unified	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Meter	Meter / unified	Meter	Meter	Other	Meter	Meter	Meter
Screw size (Nominal)	-	M6 ～ M20	No.10-32UNF ～ M45	M1 ～ M30	1 ～ M48	1'-11 ～ 7/8-14	M1.4 ～ M24	M3 ～ M24	M2 ～ M24	W1 ～ W7/8	-	1/2 ～ 9/16	M2 ～ M12	M1.4 ～ M20	M3 ～ M12	M2 ～ M12	M2 ～ M12	1UN ～ M30	M2 ～ M12	M3 ～ M12	M2 ～ M30	1UN ～ M48	M2.3 ～ M12	M3 ～ M20	M3 ～ M48	M6 ～ M12	-	M1.4 ～ M42	M3 ～ M24	M3 ～ M24	M2 ～ M6	M1.4 ～ M42	1/2UN ～ M42	R1/2 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	M3 ～ M12	M1 ～ M12	M1 ～ M20	M3 ～ M12	S0.1 ～ S1.4	M3 ～ M16	M3 ～ M16	M2 ～ M30
Pitch (P), Number of Threading(mm)	-	1 ～ 2.5	0.3 ～ 4.5	0.25 ～ 3.5	0.4 ～ 20	-	0.3 ～ 3	0.5 ～ 3	0.25 ～ 3	12 ～ 40	-	20 ～ 24	0.4 ～ 1.75	0.3 ～ 2.5	0.5 ～ 1.75	0.4 ～ 1.75	0.4 ～ 1.75	0.45 ～ 40	0.4 ～ 1.75	0.5 ～ 1.75	0.4 ～ 3.5	0.4 ～ 28	0.4 ～ 1.75	0.5 ～ 2.5	0.5 ～ 5	1 ～ 1.75	0.5 ～ 3	0.3 ～ 4.5	0.5 ～ 3	0.5 ～ 3	0.4 ～ 1	0.3 ～ 4.5	0.4 ～ 48	14 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	0.5 ～ 1.75	0.25 ～ 56	0.25 ～ 2.5	0.5 ～ 1.75	0.025 ～ 0.3	0.5 ～ 2	0.5 ～ 2	0.4 ～ 2
Chamfer threads (Lcf)	-	-	2.5P	1.5P ～ 5P	1.5P ～ 5P	2.5P	5P	3P	2.5P	-	-	-	-	-	-	2.5 P ～ 2.5P	5 P ～ 5P	1.5P ～ 9P	2.5P	1.5P ～ 2.5P	1.5P ～ 5P	1.5P ～ 5P	3P	1.5P ～ 3P	2P ～ 5P	-	-	5P	5P	5P	6P	4P	4P	3P	2.5P	2.5P	2.5P	2P ～ 4P	2P ～ 4P	2P	2P ～ 4P	-	2.5P	1.5P ～ 9P	-
Tool Material Type	-	Carbide	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Powder high-speed steel	Alloy HSS / SKS	-	High-speed steel	Carbide	Carbide	Carbide	Powder high-speed steel	Vanadium High-Speed Steel	High-speed steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Cobalt HSS	Vanadium High-Speed Steel	Powder high-speed steel	Carbide	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Carbide	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Carbide	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Alloy HSS
work material	-	-	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Thermosetting plastic (bakelite, phenol, etc.)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Hardness Steel (50-60 HRC)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless steel (SUS)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○]
Tap Type	Thread-cutting-related tool	Thread cutter	Spiral Tap	Hand Tap	Hand Tap	Tap for pipes	Point tap	Spiral Tap	Spiral Tap	Hand Tap	-	Die	Thread cutter	Thread cutter	Thread cutter	Spiral Tap	Point tap	Hand Tap	Spiral Tap	Spiral Tap	Hand Tap	Hand Tap	Hand Tap	Hand Tap	Hand Tap	Thread cutter	Thread cutter	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Roll tap	Roll tap	Thread cutter	Spiral Tap	Hand Tap	Die
Hole type	-	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For blind hole	For blind hole	For through hole	-	-	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	For blind hole	For through hole / For blind hole	-
Coating Y/N	NA	Available	NA	NA	NA	NA	NA	NA	Available	NA	-	NA	Available	Available	Available	NA	NA	NA	NA	NA	NA	NA	Available	Available	NA	Available	Available	Available	Available	Available	NA	NA	NA	Available	NA	NA	NA	Available	Available	Available	NA	Available	-	NA	-
Coating Type	Non-Coated	TiCN	-	-	-	-	-	-	Other	-	-	Non-Coated	TiAlN	TiAlN	For High Hardness (Silicon Group)	-	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	TiN	TiN	TiCN	Non-Coated	Non-Coated	Non-Coated	TiCN	Non-Coated	Non-Coated	Non-Coated	TiN	TiCN	TiCN	Non-Coated	TiAlN	-	Non-Coated	-
Overall Length (L)(mm)	-	54 ～ 102	36 ～ 180	36 ～ 135	70 ～ 300	55 ～ 250	36 ～ 200	46 ～ 120	80 ～ 200	95 ～ 125	-	-	58 ～ 73	39 ～ 105	48 ～ 74	40 ～ 82	40 ～ 82	46 ～ 155	40 ～ 82	46 ～ 82	40 ～ 135	80 ～ 300	42 ～ 82	46 ～ 105	46 ～ 185	62 ～ 89	60 ～ 120	34 ～ 175	100 ～ 200	46 ～ 120	40 ～ 62	34 ～ 175	40 ～ 175	59 ～ 87	100 ～ 150	55 ～ 95	55 ～ 95	80 ～ 200	60 ～ 200	30 ～ 105	46 ～ 82	45	46 ～ 95	46 ～ 95	-