(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Screw-Hole-Related Tools（Page7）

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

1,353 items

: 30; 45; 60

Days to Ship	All Same day 2 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less

Taper Tap Series for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT

OSG

Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.

Standard Price:	904,165 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes For Aluminum V-AL-TPT

OSG

Ideal for machining tapered female screws in aluminum alloy pipe, where the internal threading has a tendency to gouge

Volume Discount

Standard Price:	488,308 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Interlap Type Long Shank EX-LT-IRT

OSG

It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

Standard Price:	903,589 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Interlap Type Short Thread EX-S-IRT

OSG

It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

Volume Discount

Standard Price:	457,013 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Interlap Type Short Thread, Long Shank EX-LT-S-IRT

OSG

It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

Standard Price:	963,898 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Short Screw for Stainless Steel, Long Shank LT-SUS-S-TPT

OSG

It is suitable for hard-to-cut materials, such as stainless steel.

Standard Price:	728,462 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Spiral Tap SFT-TPT

OSG

Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.

Standard Price:	374,070 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Spiral Tap, Long Shank LT-SFT-TPT

OSG

Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.

Standard Price:	629,954 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Spiral Tap, Long Shank Short Screw LT-SFT-S-TPT

OSG

Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.

Standard Price:	845,735 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Spiral Tap Short Screw SFT-S-TPT

OSG

Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.

Volume Discount

Standard Price:	505,636 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes General Use (Left-hand thread) TPT

OSG

Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes

Standard Price:	525,365 IDR-
Days to Ship:	11 Day(s) or more

Taper Tap Series for Pipes General Use Long Shank LT-TPT

OSG

Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes

Standard Price:	549,196 IDR-
Days to Ship:	9 Day(s) or more

Taper Tap Series for Pipes General Use Short Screw, Long Shank LT-S-TPT

OSG

Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes

Standard Price:	648,717 IDR-
Days to Ship:	9 Day(s) or more

Taper Tap Series for Pipes General Use Short Screw, Oxidizing H-S-TPT

OSG

Used to process tapered female pipe threads. Short threading type used for tapping short thread lengths such as those for elbows and tees

Standard Price:	371,954 IDR-
Days to Ship:	9 Day(s) or more

Taper Tap Series for Pipes For cast iron EX-FC-TPT

OSG

Suitable for various cast iron and brass castings such as gray cast iron, spherical cast iron, graphite cast iron, and malleable cast iron.

Standard Price:	317,227 IDR-
Days to Ship:	11 Day(s) or more

Taper Tap Series for Pipes Taper Tap for Carbide Pipes OT-TPT

OSG

Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.

Standard Price:	3,113,402 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT

OSG

Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.

Standard Price:	2,618,000 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes For Soft Steel STL-TPT

OSG

Suitable for low carbon steel, general mild steel and more

Standard Price:	317,227 IDR-
Days to Ship:	9 Day(s) or more

Taper Tap Series for Pipes Short Screws for Soft Steel STL-S-TPT

OSG

Suitable for low carbon steel, general mild steel and more

Standard Price:	343,809 IDR-
Days to Ship:	11 Day(s) or more

Taper Tap Series for Pipes For Difficult-to-Machine Materials CPM-TPT

OSG

The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Volume Discount

Standard Price:	579,277 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT

OSG

The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Standard Price:	814,336 IDR-
Days to Ship:	8 Day(s) or more

Taper Tap Series for Pipes Short Screws for Difficult-to-Machine Materials, Long Shank CPM-LT-S-TPT

OSG

The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Standard Price:	936,425 IDR-
Days to Ship:	11 Day(s) or more

Taper Tap Series for Pipes With Oil Hole OIL-TPT

OSG

Convenient for lateral tapping of pipe threads and processing deep holes. The cutting oil acts on the cutting edge through the oil hole, enabling high-speed and high-precision tapping

Standard Price:	1,047,443 IDR-
Days to Ship:	9 Day(s) or more

Parallel Tap Series for Pipes TiN Coating TIN-SPT

OSG

TiN coating excellent in welding resistance and abrasion resistance is applied.

Standard Price:	421,990 IDR-
Days to Ship:	11 Day(s) or more

Parallel Tap Series for Pipes For Oversize EX-SPT

OSG

Used to process female threads for parallel pipe threads.

Standard Price:	256,245 IDR-
Days to Ship:	11 Day(s) or more

Parallel Taper Tap Series for Pipes For stainless steel EX-SUS-SPT

OSG

It is suitable for hard-to-cut materials, such as stainless steel.

Standard Price:	270,870 IDR-
Days to Ship:	9 Day(s) or more

Parallel Taper Tap Series for Pipes Spiral Tap SFT-SPT

OSG

Spiral types have been made available for blind holes to match the form of the workpiece.

Standard Price:	299,015 IDR-
Days to Ship:	9 Day(s) or more

Parallel Tap Series for Pipes Spiral Tap, Long Shank LT-SFT-SPT

OSG

To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.

Standard Price:	600,245 IDR-
Days to Ship:	9 Day(s) or more

Parallel Tap Series for Pipes New Roll Tap NRT-SPT

OSG

Convenient for lateral tapping of pipe threads and processing deep holes.

Standard Price:	415,736 IDR-
Days to Ship:	8 Day(s) or more

Parallel Tap Series for Pipes Point tap EX-POT-SPT

OSG

[Specifications]
· Shape: Point tap
· Screw type: pipe parallel
· Chamfer threads: 4 P
· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy ) [◎] / Alloy Steel (SCM) [◎] / Cast Steel (SC) [◎] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, Etc.) [○]

Standard Price:	265,627 IDR-
Days to Ship:	9 Day(s) or more

Parallel Tap Series for Pipes General Use (Left-hand thread) SPT

OSG

Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.

Standard Price:	364,136 IDR-
Days to Ship:	9 Day(s) or more

Taper Tap Series for Pipes General Use Long Shank LT-SPT

OSG

Used to process female threads for parallel pipe threads.

Standard Price:	543,954 IDR-
Days to Ship:	11 Day(s) or more

Parallel Tap Series for Pipes General Use Oxidizing H-SPT

OSG

Used to process female threads for parallel pipe threads.

Standard Price:	256,245 IDR-
Days to Ship:	8 Day(s) or more

Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT

OSG

To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.

Standard Price:	2,376,531 IDR-
Days to Ship:	8 Day(s) or more

Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes, Long Shank OT-LT-SPT

OSG

To match the form of the workpiece, point types have been made available for through holes, and spiral types for blind holes.

Standard Price:	3,193,199 IDR-
Days to Ship:	8 Day(s) or more

Parallel Tap Series for Pipes For Difficult-to-Machine Materials CPM-SPT

OSG

The work material is ideal for female threading of high carbon steel, tool steel, or tempered material with hardness of about 20 to 45 HRC

Standard Price:	393,658 IDR-
Days to Ship:	11 Day(s) or more

Parallel Tap Series for Pipes With Oil Hole OIL-SPT

OSG

Convenient for lateral tapping of pipe threads and processing deep holes. The cutting oil acts on the cutting edge through the oil hole, enabling high-speed and high-precision tapping

Standard Price:	1,206,934 IDR-
Days to Ship:	9 Day(s) or more

Grooveless Tap Series IT New Roll IT-NRT

OSG

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Volume Discount

Standard Price:	320,354 IDR-
Days to Ship:	8 Day(s) or more

Grooveless Tap Series UM New Roll UM-NRT

OSG

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Standard Price:	524,634 IDR-
Days to Ship:	8 Day(s) or more

Grooveless Tap Series VP New Roll, Short Chamfered Type VP-SC-NRT

OSG

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Volume Discount

Standard Price:	320,354 IDR-
Days to Ship:	8 Day(s) or more

Grooveless Tap Series VP New Roll, Short Screw Type VP-NRTS

OSG

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Standard Price:	301,591 IDR-
Days to Ship:	9 Day(s) or more

Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT

OSG

The V (composite multilayer coating) provides high durability.

Standard Price:	415,736 IDR-
Days to Ship:	9 Day(s) or more

Grooveless Tap Series V Coating With Inner Diameter Finishing Tooth V-EG-NRT

OSG

Even if the diameters of pilot holes vary due to bore cutting during forward operation, it does not over-roll, making management of the hole diameter easy. By selecting the pilot hole diameter, it is possible to remove broken ridges from female threads.

Standard Price:	392,281 IDR-
Days to Ship:	9 Day(s) or more

Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT

OSG

Ideal for tapping soft steel thin plate with a tensile strength of 700 N/mm² or less. Suppresses production of whiskers, flashes, and chipping.

Standard Price:	315,663 IDR-
Days to Ship:	8 Day(s) or more

Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT

OSG

Highly accurate female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.

Standard Price:	201,518 IDR-
Days to Ship:	9 Day(s) or more


Brand
Product Series
Days to Ship
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)


Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Taper Tap Series for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT	Taper Tap Series for Pipes For Aluminum V-AL-TPT	Taper Tap Series for Pipes Interlap Type Long Shank EX-LT-IRT	Taper Tap Series for Pipes Interlap Type Short Thread EX-S-IRT	Taper Tap Series for Pipes Interlap Type Short Thread, Long Shank EX-LT-S-IRT	Taper Tap Series for Pipes Short Screw for Stainless Steel, Long Shank LT-SUS-S-TPT	Taper Tap Series for Pipes Spiral Tap SFT-TPT	Taper Tap Series for Pipes Spiral Tap, Long Shank LT-SFT-TPT	Taper Tap Series for Pipes Spiral Tap, Long Shank Short Screw LT-SFT-S-TPT	Taper Tap Series for Pipes Spiral Tap Short Screw SFT-S-TPT	Taper Tap Series for Pipes General Use (Left-hand thread) TPT	Taper Tap Series for Pipes General Use Long Shank LT-TPT	Taper Tap Series for Pipes General Use Short Screw, Long Shank LT-S-TPT	Taper Tap Series for Pipes General Use Short Screw, Oxidizing H-S-TPT	Taper Tap Series for Pipes For cast iron EX-FC-TPT	Taper Tap Series for Pipes Taper Tap for Carbide Pipes OT-TPT	Taper Tap Series for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT	Taper Tap Series for Pipes For Soft Steel STL-TPT	Taper Tap Series for Pipes Short Screws for Soft Steel STL-S-TPT	Taper Tap Series for Pipes For Difficult-to-Machine Materials CPM-TPT	Taper Tap Series for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT	Taper Tap Series for Pipes Short Screws for Difficult-to-Machine Materials, Long Shank CPM-LT-S-TPT	Taper Tap Series for Pipes With Oil Hole OIL-TPT	Parallel Tap Series for Pipes TiN Coating TIN-SPT	Parallel Tap Series for Pipes For Oversize EX-SPT	Parallel Taper Tap Series for Pipes For stainless steel EX-SUS-SPT	Parallel Taper Tap Series for Pipes Spiral Tap SFT-SPT	Parallel Tap Series for Pipes Spiral Tap, Long Shank LT-SFT-SPT	Parallel Tap Series for Pipes New Roll Tap NRT-SPT	Parallel Tap Series for Pipes Point tap EX-POT-SPT	Parallel Tap Series for Pipes General Use (Left-hand thread) SPT	Taper Tap Series for Pipes General Use Long Shank LT-SPT	Parallel Tap Series for Pipes General Use Oxidizing H-SPT	Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT	Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes, Long Shank OT-LT-SPT	Parallel Tap Series for Pipes For Difficult-to-Machine Materials CPM-SPT	Parallel Tap Series for Pipes With Oil Hole OIL-SPT	Grooveless Tap Series IT New Roll IT-NRT	Grooveless Tap Series UM New Roll UM-NRT	Grooveless Tap Series VP New Roll, Short Chamfered Type VP-SC-NRT	Grooveless Tap Series VP New Roll, Short Screw Type VP-NRTS	Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT	Grooveless Tap Series V Coating With Inner Diameter Finishing Tooth V-EG-NRT	Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT	Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT
Days to Ship	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	11 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	11 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	11 Day(s) or more	8 Day(s) or more	8 Day(s) or more	11 Day(s) or more	9 Day(s) or more	11 Day(s) or more	11 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	11 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	11 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more
Screw Types	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Meter / unified	Miniature	Meter / unified	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	PF1 ～ PF3/8	PS1 ～ PS3/8	R1 ～ R3/8	PF1 ～ PF3/8	PF1 ～ PF3/8	G1 ～ G3/8	G1 ～ Rp3/8	Rp1 ～ Rp3/8	G1 ～ G7/8	G1 ～ G3/8	G1 ～ G3/8	G1 ～ G3/8	G1 ～ G3/8	M1 ～ No4UN	S0.5 ～ S0.9	M1 ～ No6UN	M1 ～ M2.6	M2 ～ M6	M3 ～ M12	M1.4 ～ M6	M1 ～ M6
Pitch (P), Number of Threading(mm)	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 19	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	0.25 ～ 56	.02 ～ 0.225	0.25 ～ 56	0.25 ～ 0.45	0.4 ～ 1	0.5 ～ 1.75	0.3 ～ 1	0.25 ～ 1
Chamfer threads (Lcf)	3P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	4P	4P	4P	2.5P	2.5P	2.5P	4P	4P	4P	1.5P ～ 4P	3P	3P	4P	4P	2P	2P	1P	2P	2P	2P ～ 4P	8P	2P ～ 4P
Tool Material Type	Powder high-speed steel	Vanadium High-Speed Steel	Carbide	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Carbide	Carbide	High-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Carbide	Powder high-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel
work material	Quenched and tempered steel (45 to 55 HRC)[◎]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Copper (Cu)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]
Tap Type	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Point tap	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap
Hole type	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	-	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole
Coating Y/N	Available	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	Available	Available	Available	Available	Available	NA
Coating Type	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	CrN	TiCN	TiCN	TiCN	TiCN	TiCN	Non-Coated
Overall Length (L)(mm)	59 ～ 109	55 ～ 95	120 ～ 150	55 ～ 120	120 ～ 150	100 ～ 150	55 ～ 110	100 ～ 150	100 ～ 150	55 ～ 95	55 ～ 95	100 ～ 150	100 ～ 150	55 ～ 110	55 ～ 95	55 ～ 95	55 ～ 95	55 ～ 95	55 ～ 95	55 ～ 95	62 ～ 95	120 ～ 150	120 ～ 150	55 ～ 95	55 ～ 95	55 ～ 95	55 ～ 110	120 ～ 150	55 ～ 95	55 ～ 95	55 ～ 95	120 ～ 150	55 ～ 95	55 ～ 95	100 ～ 150	55 ～ 95	150	30 ～ 46	30	30 ～ 62	30 ～ 44	80 ～ 120	46 ～ 82	34 ～ 62	30 ～ 62